Chapter 03
Materials (Steel, Aluminium, Composites)
Mechanical properties, grades and design values of shipbuilding materials: normal and higher-strength hull steels, marine aluminium alloys, FRP laminates and sandwich cores. Includes material factors used by classification rules, corrosion margins and galvanic compatibility.
Sections
- 3.1Hull structural steel grades (A, B, D, E; AH32/36, DH36, EH36)Content for this section is in preparation. See the chapter overview for scope.
- 3.2Material factor k and yield strength in rule formulasContent for this section is in preparation. See the chapter overview for scope.
- 3.3Marine aluminium alloys (5083, 5383, 6082) and welded-zone strengthContent for this section is in preparation. See the chapter overview for scope.
- 3.4Stainless steels and duplex grades in marine serviceContent for this section is in preparation. See the chapter overview for scope.
- 3.5Fibre-reinforced plastics: fibres, resins, laminate propertiesContent for this section is in preparation. See the chapter overview for scope.
- 3.6Sandwich cores (PVC foam, SAN foam, balsa) and typical propertiesContent for this section is in preparation. See the chapter overview for scope.
- 3.7Laminate design values and safety factors (DNV, ISO 12215-5)Content for this section is in preparation. See the chapter overview for scope.
- 3.8Corrosion, corrosion additions and cathodic protection basicsContent for this section is in preparation. See the chapter overview for scope.
- 3.9Galvanic series and dissimilar-metal connectionsContent for this section is in preparation. See the chapter overview for scope.
- 3.10Material certificates, traceability and class requirementsContent for this section is in preparation. See the chapter overview for scope.