Chapter 04
Ship Geometry & Hydrostatics
Definitions of the hull form and its principal dimensions, form coefficients, and the hydrostatic properties that follow from the immersed geometry: displacement, centres of buoyancy and flotation, metacentric radii, TPC, MCT1cm, wetted surface, Bonjean curves and tonnage. Numerical integration by Simpson's rules is treated in full with worked examples.
Sections
- 4.1Principal dimensions and definitionsLength - Length overall, — extreme length between the foremost and aftermost points of the hull, excluding removable fit…
- 4.2Lines plan, body plan and offsetsThe lines plan The lines plan defines the moulded hull surface by three orthogonal sets of sections: 1. Body plan — tran…
- 4.3Form coefficients and typical valuesForm coefficients are dimensionless ratios that describe the fullness of the hull. They are defined at a stated waterlin…
- 4.4Displacement, volume and Archimedes' principleArchimedes' principle A floating body displaces a volume of fluid whose weight equals the weight of the body. In equilib…
- 4.5Simpson's rules and numerical integration of ship curvesShip curves (waterlines, sectional area curves, GZ curves) are defined by tabulated ordinates at equal spacing . Their i…
- 4.6Areas, moments, centroids and second moments of waterplanes and sectionsThe same Simpson table that gives an area also gives its first and second moments when each product is multiplied by the…
- 4.7Hydrostatic particulars: KB, BM, KM, LCB, LCFDefinitions (all heights above the moulded baseline, K) - — height of the centre of buoyancy (centroid of the immersed v…
- 4.8TPC, MCT1cm and hydrostatic curvesTonnes per centimetre immersion, TPC Mass that changes the mean draught by 1 cm at a given waterline. Because the added…
- 4.9Wetted surface area approximationsThe wetted surface [m²] is needed for frictional resistance (Chapter 6), paint area and shell-plating weight. It is comp…
- 4.10Bonjean curves and their useDefinition A Bonjean curve is the plot, for one station, of the immersed cross-sectional area against height above the b…
- 4.11Effect of water density: FWA and dock water allowanceA ship of constant mass displaces a constant mass of water; when it moves into water of lower density it must displace a…
- 4.12Tonnage measurement basics (ITC 1969)Tonnage is a volume-based measure of ship size used for registration, fees, manning and the applicability thresholds of…