Chapter 4 / Section 4.11
Effect of water density: FWA and dock water allowance
A ship of constant mass displaces a constant mass of water; when it moves into water of lower density it must displace a greater volume and therefore sinks deeper.
Fresh water allowance, FWA
The increase of draught when passing from seawater (1.025 t/m³) to fresh water (1.000 t/m³) at constant displacement:
with in tonnes and the seawater value in t/cm. The FWA is marked on the load line (the F mark above S) and is tabulated in the stability booklet for the summer displacement.
Derivation: equal mass, so ; the extra volume is a layer of area ; its thickness in mm is ; substituting and gives (exactly ; the 4 is the Load Line Convention's rounding).
Dock water allowance, DWA
For water of intermediate density (t/m³):
A ship may be loaded in dock water so that her summer mark is submerged by the DWA; on reaching seawater she will rise to the mark.
General change of draught for a density change (constant displacement)
Effect on hydrostatic data
Hydrostatic tables are normally for seawater. In fresh water, at the same draught, displacement, TPC and MCT1cm scale by ; , , , (geometric quantities at that draught) do not change.
Formulas
| Symbol | Description | Unit |
|---|---|---|
| Fresh water allowance | mm | |
| Displacement (seawater) | t | |
| TPC in seawater | t/cm |
Result unit mm
| Symbol | Description | Unit |
|---|---|---|
| Dock water allowance | mm | |
| Dock water density | t/m^3 |
Result unit mm
| Symbol | Description | Unit |
|---|---|---|
| Initial water density | t/m^3 | |
| New water density | t/m^3 | |
| Waterplane area | m^2 |
Result unit m
Positive δT = increase of draught when ρ2 < ρ1.
Examples
FWA and DWA for the example vessel
Worked example
Problem
t, t/cm. Find the FWA and the dock water allowance for dock water of density 1.010 t/m³.
References
Version 2 · last updated 19 Nov 2026 · Editor