Chapter 05
Stability
Transverse and longitudinal stability of intact and damaged ships: metacentric height, righting levers at small and large angles, inclining experiment, free surface effects, GZ and KN curves, dynamic stability, IMO 2008 IS Code criteria including the weather criterion, trim calculations, list, heavy-lift operations, docking and grounding, and damage stability fundamentals. Worked numerical examples are included.
Sections
- 5.1Initial stability: metacentre, GM and the righting lever at small anglesEquilibrium and the metacentre A floating ship is in equilibrium when the weight acting through the centre of gravity an…
- 5.2The inclining experimentPurpose To determine the lightship displacement and the lightship centre of gravity ( and , and if not zero) of the comp…
- 5.3Free surface effect of liquids in tanksMechanism When a tank is partly filled, the liquid surface stays horizontal as the ship heels; the liquid's centre of gr…
- 5.4Stability at large angles: GZ curves, cross curves (KN)Why the metacentre is not enough Beyond about 10° the metacentre moves and no longer holds; deck-edge immersion, bilge e…
- 5.5Dynamic stability and the area under the GZ curveDefinition The dynamical stability at angle is the work done in heeling the ship from upright to : with in radians. The…
- 5.6IMO 2008 IS Code: general intact stability criteriaThe Code The International Code on Intact Stability, 2008 (2008 IS Code, IMO Res. MSC.267(85), in force 1 July 2010, as…
- 5.7IMO 2008 IS Code: severe wind and rolling (weather) criterionScope Part A, Ch. 2.3 of the IS Code. Applies to passenger and cargo ships of 24 m and above (and, through Part B, to fi…
- 5.8Longitudinal stability and trimLongitudinal metacentre The longitudinal metacentric height is large (of the order of the ship length), so a ship is nev…
- 5.9List due to transverse weight shift and added weightsList vs heel List is a steady inclination caused by an off-centre centre of gravity (or an asymmetric buoyancy after dam…
- 5.10Heavy-lift operations and suspended weightsThe suspended weight acts at the point of suspension When a mass is lifted by a crane or derrick, its weight acts at the…
- 5.11Dry-docking and groundingThe critical instant When a ship with stern trim enters a dry dock, the stern (the sternframe or the aft end of the keel…
- 5.12Damage stability fundamentals: lost buoyancy vs added weight, permeabilityTwo equivalent methods When a compartment is opened to the sea, the final equilibrium can be computed in two ways: Added…
- 5.13Fishing vessel stability: Torremolinos/Cape Town and NMA requirementsInternational framework - Torremolinos International Convention for the Safety of Fishing Vessels, 1977 , as modified by…
- 5.14Loading conditions and the stability bookletPurpose The stability booklet (stability information, trim and stability booklet) is the approved document that allows t…