Chapter 5 / Section 5.2
The inclining experiment
Purpose
To determine the lightship displacement and the lightship centre of gravity ( and , and if not zero) of the completed ship by measurement. Required by SOLAS II-1 Reg. 5 for passenger and cargo ships and by the IS Code (Part B, Ch. 8) which gives the detailed procedure; classification societies witness it on behalf of the flag state.
Principle
A known mass is moved a known transverse distance ; the resulting heel is measured. From and :
With from the hydrostatics at the measured draughts, .
Procedure (IS Code 2008 Part B Ch. 8 and Annex 1, summarised)
- Ship as complete as possible; list of items to be added/removed with masses and centres; tanks empty or pressed full (minimise free surfaces); no slack tanks except where unavoidable — record them.
- Calm, sheltered water; wind < ~ 3 Bft; mooring lines slack; gangway lifted; no persons moving.
- Measure draughts at marks (both sides, forward, midship, aft) and the water density; compute displacement, , from the hydrostatics for the measured trim.
- Inclining weights: total mass sufficient to produce 1°–4° heel (minimum about 1°); typically 4 weights, moved in 8 shifts (e.g. 0, 1P, 2P, 1P, 0, 1S, 2S, 1S, 0) producing at least 8 readings.
- Heel measured by at least 2 (preferably 3) pendulums of length ≥ 3 m (deflection read on a batten with the pendulum damped in oil), or U-tubes or inclinometers.
- Plot heeling moment against for each pendulum; the points must lie on a straight line through the origin. Non-linearity indicates free surface, a weight touching, or a mooring restraint.
- slope / ; correct for free surface of any slack tank; obtain .
- Remove items to be removed and add items to be added (with their centres) to arrive at the lightship , , .
Corrections and pitfalls
- Free surface moments of slack tanks (Section 5.3) must be added to the measured to obtain the solid (the measured value is the fluid ).
- Use for the actual trim and displacement, not the design value.
- Pendulum deflection over length : .
- Lightship check: if the lightship displacement or differs significantly from the previous one (SOLAS: deviation of lightship > 2 % or > 1 % of for passenger ships), a new inclining test and a new stability booklet are required.
Formulas
| Symbol | Description | Unit |
|---|---|---|
| Mass moved | t | |
| Transverse distance moved (centre to centre) | m | |
| Displacement as inclined (from measured draughts and water density) | t | |
| Angle of heel produced | deg |
Result unit m
| Symbol | Description | Unit |
|---|---|---|
| Pendulum deflection on the batten | m | |
| Pendulum length | m |
Result unit -
| Symbol | Description | Unit |
|---|---|---|
| Free surface correction of slack tanks present during the test. The pendulum measures the fluid GM; solid GM = fluid GM + GG_FS and solid KG = KM − solid GM. | m |
Result unit m
The pendulum measures the fluid GM. Solid GM = fluid GM + GG_FS; solid KG = KM − solid GM.
| Symbol | Description | Unit |
|---|---|---|
| Masses on board during the test that are not part of lightship (inclining weights, temporary equipment, people, slack liquids) | t | |
| Lightship items missing at the time of the test | t |
Result unit m
Tables
Inclining test: acceptance limits and requirements (IS Code 2008 Part B Ch. 8 / Annex 1)
| Item | Requirement |
|---|---|
| Angle of heel per shift | Sufficient for accuracy; total heel each side 1°–4° |
| Number of weight movements | Eight (standard), giving at least 8 readings |
| Pendulums | Minimum 2 (3 recommended), length ≥ 3 m, in different locations |
| Alternative devices | U-tubes, inclinometers — with Administration's acceptance |
| Free surfaces | Tanks empty and clean, or pressed full; slack tanks minimised and recorded |
| Weather | Calm; wind not to cause measurable heel |
| Mooring | Slack lines; shore gangway removed |
| Plot | Heeling moment vs tan φ must be linear through origin |
| Draught readings | Both sides at forward, midship and aft marks; water density sampled |
Examples
Inclining experiment on the example vessel
Worked example
Problem
At the inclining test the displacement from the draught survey is t and m. Four weights of 2.5 t each (total 10 t) are moved 12.0 m across the deck. The mean deflection of a 6.00 m pendulum is 150 mm. All tanks are empty except one fuel tank with a free-surface moment of 435 t·m. Determine the solid and as inclined.
References
Made mandatory in practice by SOLAS II-1 Reg. 5 and by flag state regulations (e.g. NMA).
Check the edition in force for the project.
Version 3 · last updated 19 Nov 2026 · Editor