NavArchHandbook0 ch

No chapters yet.

Engineering tools
NavArchHandbook
NavArchHandbook
↵
BookmarksTools
Home›5. Stability›5.1 Initial stability: metacentre, GM and the righting lever at small angles

Chapter 5 / Section 5.1

Initial stability: metacentre, GM and the righting lever at small angles

Print this section

Equilibrium and the metacentre

A floating ship is in equilibrium when the weight Δg\Delta gΔg acting through the centre of gravity GGG and the buoyancy acting through the centre of buoyancy BBB are equal and collinear. When the ship is heeled by a small angle φ\varphiφ by an external moment, the immersed volume changes shape, BBB moves to BφB_\varphiBφ​, and the vertical through BφB_\varphiBφ​ intersects the centreline at the transverse metacentre MMM. For small angles (up to about 7–10° for wall-sided ships) MMM is practically fixed.

Metacentric height

GM=KM−KG=KB+BM−KGGM = KM - KG = KB + BM - KGGM=KM−KG=KB+BM−KG
  • GM>0GM > 0GM>0: stable — the couple formed by weight and buoyancy returns the ship to upright.
  • GM=0GM = 0GM=0: neutral.
  • GM<0GM < 0GM<0: unstable in the upright condition; the ship lolls to an angle where GZ=0GZ = 0GZ=0 again (angle of loll).

Righting lever and righting moment

GZ=GMsin⁡φ(small angles)GZ = GM\sin\varphi \qquad\text{(small angles)}GZ=GMsinφ(small angles) MR=Δ g GZ  [kN⋅m]orΔ GZ  [t⋅m]M_R = \Delta\,g\,GZ \;[\text{kN·m}] \quad\text{or}\quad \Delta\,GZ \;[\text{t·m}]MR​=ΔgGZ[kN⋅m]orΔGZ[t⋅m]

In stability work the righting moment is often quoted in t·m (mass units); multiply by ggg for kN·m.

Wall-sided formula

For a ship whose sides are vertical over the range of heel (no deck-edge immersion, no bilge emergence), the exact lever is

GZ=(GM+12BMtan⁡2φ)sin⁡φGZ = \left(GM + \tfrac{1}{2}BM\tan^2\varphi\right)\sin\varphiGZ=(GM+21​BMtan2φ)sinφ

It is a useful check on computed GZ values up to about 20–25°.

Angle of loll

If GM<0GM < 0GM<0, the wall-sided formula gives the angle at which the ship finds equilibrium:

tan⁡φloll=−2 GMBM\tan\varphi_{\text{loll}} = \sqrt{\frac{-2\,GM}{BM}}tanφloll​=BM−2GM​​

At loll the effective metacentric height is GMloll=−2 GM/cos⁡φlollGM_{\text{loll}} = -2\,GM/\cos\varphi_{\text{loll}}GMloll​=−2GM/cosφloll​ (positive). A ship at loll must never be "corrected" by shifting weight to the high side; lower GGG first (fill low tanks, press up slack tanks on the low side).

Period of roll

Tφ=2π kxxg GM≈2 C BGMT_\varphi = \frac{2\pi\,k_{xx}}{\sqrt{g\,GM}} \approx \frac{2\,C\,B}{\sqrt{GM}}Tφ​=gGM​2πkxx​​≈GM​2CB​

with kxxk_{xx}kxx​ the transverse radius of gyration and C≈0.40C \approx 0.40C≈0.40 for conventional ships (IS Code uses C=0.373+0.023 B/d−0.043 L/100C = 0.373 + 0.023\,B/d - 0.043\,L/100C=0.373+0.023B/d−0.043L/100, see Section 5.7). A stiff ship (large GM) rolls quickly and uncomfortably; a tender ship (small GM) rolls slowly.

Effect of adding, removing or shifting mass (vertical)

Adding mass www at height KgKgKg: KG′=Δ KG+w KgΔ+wKG' = \dfrac{\Delta\,KG + w\,Kg}{\Delta + w}KG′=Δ+wΔKG+wKg​ (remove: negative www). Shifting mass www vertically by hhh: GG′=w hΔGG' = \dfrac{w\,h}{\Delta}GG′=Δwh​.

Formulas

01Metacentric height
GM=KM−KG=KB+BM−KGGM = KM - KG = KB + BM - KGGM=KM−KG=KB+BM−KG
SymbolDescriptionUnit
GMGMGMTransverse metacentric heightm
KMKMKMHeight of transverse metacentre (from hydrostatics)m
KGKGKGHeight of centre of gravitym

Result unit m

02Righting lever, small angles
GZ=GMsin⁡φGZ = GM\sin\varphiGZ=GMsinφ
SymbolDescriptionUnit
GZGZGZRighting leverm
φ\varphiφAngle of heeldeg / rad

Result unit m

Valid up to about 7–10° for conventional hulls.

03Righting moment
MR=Δ g GZM_R = \Delta\, g\, GZMR​=ΔgGZ
SymbolDescriptionUnit
MRM_RMR​Righting momentkN·m
Δ\DeltaΔDisplacementt
ggg9.81m/s^2

Result unit kN·m

04Wall-sided formula
GZ=(GM+12BMtan⁡2φ)sin⁡φGZ = \left(GM + \tfrac{1}{2}BM\tan^2\varphi\right)\sin\varphiGZ=(GM+21​BMtan2φ)sinφ
SymbolDescriptionUnit
BMBMBMTransverse metacentric radiusm

Result unit m

Exact for vertical sides over the heel range (no deck-edge immersion, no bilge emergence).

05Angle of loll
tan⁡φloll=−2 GMBM\tan\varphi_{\text{loll}} = \sqrt{\frac{-2\,GM}{BM}}tanφloll​=BM−2GM​​
SymbolDescriptionUnit
φloll\varphi_{\text{loll}}φloll​Angle of lolldeg

Result unit deg

Only for GM < 0.

06Roll period
Tφ=2πkxxg GM≈2 C BGMT_\varphi = \frac{2\pi k_{xx}}{\sqrt{g\,GM}} \approx \frac{2\,C\,B}{\sqrt{GM}}Tφ​=gGM​2πkxx​​≈GM​2CB​
SymbolDescriptionUnit
TφT_\varphiTφ​Natural roll periods
kxxk_{xx}kxx​Transverse radius of gyration (≈ 0.35–0.45 B)m
CCCRoll coefficient (≈ 0.40; IS Code formula in 5.7)-
BBBBreadthm

Result unit s

07New KG after adding mass
KG′=Δ KG+w KgΔ+wKG' = \frac{\Delta\, KG + w\, Kg}{\Delta + w}KG′=Δ+wΔKG+wKg​
SymbolDescriptionUnit
wwwAdded mass (negative when removed)t
KgKgKgHeight of the centre of gravity of the added massm

Result unit m

08Shift of G due to a vertical shift of mass
GG′=w hΔGG' = \frac{w\, h}{\Delta}GG′=Δwh​
SymbolDescriptionUnit
hhhVertical distance movedm

Result unit m

Tables

Typical initial GM values in service (solid, after free-surface correction)

Ship typeTypical GMGMGM [m]Comment
Passenger ship / cruise1.5–3.0Comfort limits upper value
Container ship0.5–2.0 (loaded)Can be very small with deck containers
Bulk carrier, loaded (heavy ore)3–8Very stiff
Tanker, loaded1.5–5—
General cargo0.4–1.5—
PSV / offshore vessel0.8–3.0Deck cargo governs
Stern trawler 25–60 m0.5–1.2Minimum 0.35 m (Torremolinos / IS Code Part B)
Tug0.6–1.5Towline criterion governs
Sailing yacht0.8–1.5 (upright)Form + ballast stability
Source: Indicative values compiled from PNA Vol. I (1988) Ch. 2 and operational experience; mandatory minima are in Sections 5.6 and 5.13.

Examples

#01

GM, GZ and roll period for the example vessel

Worked example

Problem

The vessel of Chapter 4 has KMT=5.98KM_T = 5.98KMT​=5.98 m, BMT=3.14BM_T = 3.14BMT​=3.14 m, B=16B = 16B=16 m, Δ=6314\Delta = 6314Δ=6314 t and a solid KG=5.21KG = 5.21KG=5.21 m. Find GMGMGM, the righting lever and moment at 10° heel (both small-angle and wall-sided), and the approximate roll period.

Solution

GM=5.98−5.21=0.77 mGM = 5.98 - 5.21 = 0.77\ \text{m}GM=5.98−5.21=0.77 m

Small-angle lever at 10°: GZ=0.77sin⁡10°=0.77×0.1736=0.134GZ = 0.77\sin 10° = 0.77 \times 0.1736 = 0.134GZ=0.77sin10°=0.77×0.1736=0.134 m.

Wall-sided: GZ=(0.77+0.5×3.14×tan⁡210°)sin⁡10°=(0.77+0.5×3.14×0.0311)×0.1736=(0.77+0.049)×0.1736=0.142GZ = (0.77 + 0.5 \times 3.14 \times \tan^2 10°)\sin 10° = (0.77 + 0.5 \times 3.14 \times 0.0311) \times 0.1736 = (0.77 + 0.049) \times 0.1736 = 0.142GZ=(0.77+0.5×3.14×tan210°)sin10°=(0.77+0.5×3.14×0.0311)×0.1736=(0.77+0.049)×0.1736=0.142 m.

Righting moment (wall-sided): MR=6314×9.81×0.142=8795M_R = 6314 \times 9.81 \times 0.142 = 8795MR​=6314×9.81×0.142=8795 kN·m =897= 897=897 t·m.

Roll period: Tφ≈2×0.40×160.77=12.80.877=14.6T_\varphi \approx \dfrac{2 \times 0.40 \times 16}{\sqrt{0.77}} = \dfrac{12.8}{0.877} = 14.6Tφ​≈0.77​2×0.40×16​=0.87712.8​=14.6 s — a comfortable, rather tender ship; typical for a PSV in a light condition.

References

Rawson & Tupper, Basic Ship Theory, 5th ed. (2001)Clause Vol. 1, Ch. 4 (Stability)Textbook
Barrass & Derrett (2012)Clause Ch. 13–16 (Transverse statical stability, effect of mass shifts, angle of loll)Textbook
IMO IS Code 2008Clause Part A, Ch. 2.2.4 (GM0 ≥ 0.15 m)Mandatory
Previous · 4.12Tonnage measurement basics (ITC 1969)Next · 5.2The inclining experiment

Version 2 · last updated 19 Nov 2026 · Editor

On this page

  • Equilibrium and the metacentre
  • Metacentric height
  • Righting lever and righting moment
  • Wall-sided formula
  • Angle of loll
  • Period of roll
  • Effect of adding, removing or shifting mass (vertical)
  • Formulas
  • Tables
  • Examples
  • References

Applicable standards

  • Rawson & Tupper, Basic Ship Theory, 5th ed. (2001)

    Vol. 1, Ch. 4 (Stability)

  • Barrass & Derrett (2012)

    Ch. 13–16 (Transverse statical stability, effect of mass shifts, angle of loll)

  • IMO IS Code 2008

    Part A, Ch. 2.2.4 (GM0 ≥ 0.15 m)

NavArch Handbook·About & disclaimerFeedbackBookmarks© Jadrija Maritime j.d.o.o.