Chapter 5 / Section 5.3
Free surface effect of liquids in tanks
Mechanism
When a tank is partly filled, the liquid surface stays horizontal as the ship heels; the liquid's centre of gravity moves to the low side, which produces a heeling moment that reduces the righting lever. The effect is equivalent to a virtual rise of G by
where is the second moment of area of the free surface about its own longitudinal centroidal axis and is the free surface moment [t·m]. The result is the fluid (or effective) metacentric height .
Key facts
- The effect depends on the shape of the free surface (), not on the amount of liquid — a nearly empty wide tank is as bad as a nearly full one (until it is pressed up).
- The effect is independent of the tank's position in the ship (height or side).
- Subdividing a tank by a longitudinal bulkhead into equal compartments reduces the total FSM by .
- Wing tanks that are cross-connected act as one wide tank.
- For large angles the free-surface effect is computed from the actual shift of the liquid's centroid, not from ; the IS Code (Part B Ch. 3.3) allows the correction for ordinary tanks, or exact calculation for large tanks.
- In the stability booklet, the free surface correction for each tank is listed as FSM at the actual filling; for compliance calculations the IS Code requires the tanks with the largest FSM at each loading condition to be considered (in each loading condition, for every type of liquid, at least one transverse pair or a single centreline tank is assumed slack with maximum FSM).
Second moments of common tank surfaces
- Rectangular, length , breadth :
- Triangular surface (isosceles, apex at centreline, base , length ):
- Circular, diameter :
Formulas
| Symbol | Description | Unit |
|---|---|---|
| Virtual rise of the centre of gravity | m | |
| Density of the liquid in the tank | t/m^3 | |
| Second moment of the free surface area about its centroidal longitudinal axis | m^4 | |
| Free surface moment | t·m |
Result unit m
| Symbol | Description | Unit |
|---|---|---|
| Fluid (effective) metacentric height | m |
Result unit m
| Symbol | Description | Unit |
|---|---|---|
| Tank length | m | |
| Tank breadth (across the ship) | m |
Result unit m^4 / t·m
| Symbol | Description | Unit |
|---|---|---|
| Number of equal compartments across the tank breadth | - |
Result unit t·m
Result unit m
IS Code 2008 Part B Ch. 3.3; acceptable for tanks whose shape does not change greatly with heel. For large or irregular tanks compute the actual transverse shift of the liquid centroid.
Tables
Densities of liquids carried in ships' tanks (for FSM calculations)
| Liquid | [t/m³] |
|---|---|
| Seawater ballast | 1.025 |
| Fresh water | 1.000 |
| Marine gas oil (MGO) | 0.84–0.86 (use 0.85) |
| Heavy fuel oil (HFO) | 0.95–0.99 |
| Lubricating oil | 0.90 |
| Hydraulic oil | 0.87 |
| Fish oil / fish cargo (RSW tanks) | 0.92 / 1.00–1.05 |
| Liquid mud (offshore) | 1.5–2.5 (specific to cargo) |
| Brine (offshore) | 1.2–1.4 |
| Methanol | 0.79 |
Examples
Free surface correction for a fuel tank
Worked example
Problem
A slack MGO tank ( t/m³) is rectangular, 12.0 m long and 8.0 m wide. t, solid m. Find the FSM, the virtual rise of G and the fluid GM. What is the effect of fitting a centreline longitudinal bulkhead in the tank?
References
Applied as mandatory by Administrations; defines which tanks are to be assumed slack.
Version 2 · last updated 19 Nov 2026 · Editor