Chapter 5 / Section 5.6
IMO 2008 IS Code: general intact stability criteria
The Code
The International Code on Intact Stability, 2008 (2008 IS Code, IMO Res. MSC.267(85), in force 1 July 2010, as amended) is mandatory under SOLAS Ch. II-1 Reg. 5 and the 1988 Load Line Protocol for its Part A; Part B is recommendatory but is applied by most Administrations and classification societies as if mandatory for the ship types it covers.
- Part A, Ch. 2.2 — General criteria (all ships ≥ 24 m to which the Code applies).
- Part A, Ch. 2.3 — Severe wind and rolling criterion (weather criterion) (Section 5.7).
- Part A, Ch. 3 — Special criteria for certain types of ships (passenger ships, oil tankers of 5000 DWT and above, cargo ships carrying timber deck cargoes, cargo ships carrying grain, high-speed craft).
- Part B — recommendations for fishing vessels, pontoons, containerships > 100 m, offshore supply vessels (Ch. 2.4), special purpose ships, ships engaged in anchor handling (Ch. 2.7), towing/escort (Ch. 2.8), lifting operations (Ch. 2.9); operational provisions; icing; stability booklet; inclining test; second-generation intact stability criteria (Part B Ch. 2.11, MSC.1/Circ.1627).
General criteria (Part A, Ch. 2.2)
To be met in all loading conditions in the stability booklet, with free surface corrections applied:
| Criterion | Requirement |
|---|---|
| Area under GZ curve 0°–30° | ≥ 0.055 m·rad |
| Area under GZ curve 0°–40° (or to if < 40°) | ≥ 0.090 m·rad |
| Area under GZ curve 30°–40° (or 30° to ) | ≥ 0.030 m·rad |
| Righting lever GZ | ≥ 0.20 m at an angle of heel ≥ 30° |
| Angle of maximum GZ | ≥ 25° (Administrations may accept lower under conditions in 2.2.3) |
| Initial metacentric height (corrected for free surfaces) | ≥ 0.15 m |
is the angle of downflooding: the heel at which openings in the hull, superstructures or deckhouses which cannot be closed weathertight immerse (small openings through which progressive flooding cannot occur are disregarded).
Additional provisions often forgotten
- Icing allowances (Part B Ch. 6) for ships operating in areas where icing is likely (30 kg/m² on exposed weather decks and gangways; 7.5 kg/m² on projected lateral area above the waterplane; Administrations may require more for Arctic/Barents waters).
- Offshore supply vessels (Part B Ch. 2.4.5) may use the alternative criteria: area 0–15° ≥ 0.070 m·rad when , or 0–30° ≥ 0.055 m·rad when , with linear interpolation between; GZ ≥ 0.20 m at ≥ 30°; ≥ 15°; GM0 ≥ 0.15 m.
- Anchor handling (Part B Ch. 2.7, from 2020) and towing (Ch. 2.8) add heeling-lever based criteria.
- Lifting operations (Part B Ch. 2.9): residual GM, residual area and heel angle limits during lifting.
Classification society and flag state layering
DNV Pt.3 Ch.15 refers to the IS Code and adds class notations; the Norwegian Maritime Authority applies the IS Code through its regulations on construction of cargo ships and fishing vessels, with national additions (e.g. fishing vessels — Section 5.13).
Formulas
Result unit m·rad
| Symbol | Description | Unit |
|---|---|---|
| Angle of downflooding | deg |
Result unit m·rad
Result unit m·rad
Result unit m
Result unit deg
| Symbol | Description | Unit |
|---|---|---|
| Initial metacentric height corrected for free surface effects | m |
Result unit m
Tables
IMO 2008 IS Code — general intact stability criteria (Part A, Ch. 2.2)
| No. | Criterion | Limit | IS Code reference |
|---|---|---|---|
| 1 | Area under GZ curve, 0° to 30° | ≥ 0.055 m·rad | Part A 2.2.1 |
| 2 | Area under GZ curve, 0° to 40° or φf | ≥ 0.090 m·rad | Part A 2.2.1 |
| 3 | Area under GZ curve, 30° to 40° or φf | ≥ 0.030 m·rad | Part A 2.2.1 |
| 4 | Righting lever GZ at heel ≥ 30° | ≥ 0.20 m | Part A 2.2.2 |
| 5 | Angle of maximum GZ | ≥ 25° (preferably > 30°) | Part A 2.2.3 |
| 6 | Initial GM0, free-surface corrected | ≥ 0.15 m | Part A 2.2.4 |
| 7 | Severe wind and rolling (weather criterion) | Area b ≥ area a; steady wind heel ≤ 16° or 80 % deck-edge immersion | Part A 2.3 |
Icing allowances (IS Code Part B, Ch. 6.3)
| Surface | Allowance |
|---|---|
| Exposed weather decks and gangways | 30 kg/m² |
| Projected lateral area of each side above the waterplane | 7.5 kg/m² |
| Discontinuous surfaces (rails, spars, rigging) | +5 % of projected lateral area; moment +10 % |
Examples
Compliance check of the example vessel against the general criteria
Worked example
Problem
From Examples 5.4 and 5.5: (fluid) = 0.70 m, = 0.485 m, ≈ 0.54 m at ≈ 40°, areas 0–30° = 0.1166, 0–40° = 0.2092, 30–40° = 0.0926 m·rad. Downflooding angle = 55°. Check against IS Code Part A Ch. 2.2.
References
Part A mandatory; Part B recommendatory but applied by Administrations. Check the latest consolidated edition with amendments (MSC.398(95), MSC.415(97), MSC.443(99) etc.).
Class implementation; check the edition in force.
Version 2 · last updated 19 Nov 2026 · Editor