Back to section

NavArch Handbook

Chapter 5 / Section 5.6

IMO 2008 IS Code: general intact stability criteria

The Code

The International Code on Intact Stability, 2008 (2008 IS Code, IMO Res. MSC.267(85), in force 1 July 2010, as amended) is mandatory under SOLAS Ch. II-1 Reg. 5 and the 1988 Load Line Protocol for its Part A; Part B is recommendatory but is applied by most Administrations and classification societies as if mandatory for the ship types it covers.

  • Part A, Ch. 2.2 — General criteria (all ships ≥ 24 m to which the Code applies).
  • Part A, Ch. 2.3 — Severe wind and rolling criterion (weather criterion) (Section 5.7).
  • Part A, Ch. 3 — Special criteria for certain types of ships (passenger ships, oil tankers of 5000 DWT and above, cargo ships carrying timber deck cargoes, cargo ships carrying grain, high-speed craft).
  • Part B — recommendations for fishing vessels, pontoons, containerships > 100 m, offshore supply vessels (Ch. 2.4), special purpose ships, ships engaged in anchor handling (Ch. 2.7), towing/escort (Ch. 2.8), lifting operations (Ch. 2.9); operational provisions; icing; stability booklet; inclining test; second-generation intact stability criteria (Part B Ch. 2.11, MSC.1/Circ.1627).

General criteria (Part A, Ch. 2.2)

To be met in all loading conditions in the stability booklet, with free surface corrections applied:

CriterionRequirement
Area under GZ curve 0°–30°≥ 0.055 m·rad
Area under GZ curve 0°–40° (or to φf\varphi_fφf​ if φf\varphi_fφf​ < 40°)≥ 0.090 m·rad
Area under GZ curve 30°–40° (or 30° to φf\varphi_fφf​)≥ 0.030 m·rad
Righting lever GZ≥ 0.20 m at an angle of heel ≥ 30°
Angle of maximum GZ≥ 25° (Administrations may accept lower under conditions in 2.2.3)
Initial metacentric height GM0GM_0GM0​ (corrected for free surfaces)≥ 0.15 m

φf\varphi_fφf​ is the angle of downflooding: the heel at which openings in the hull, superstructures or deckhouses which cannot be closed weathertight immerse (small openings through which progressive flooding cannot occur are disregarded).

Additional provisions often forgotten

  • Icing allowances (Part B Ch. 6) for ships operating in areas where icing is likely (30 kg/m² on exposed weather decks and gangways; 7.5 kg/m² on projected lateral area above the waterplane; Administrations may require more for Arctic/Barents waters).
  • Offshore supply vessels (Part B Ch. 2.4.5) may use the alternative criteria: area 0–15° ≥ 0.070 m·rad when φmax⁡=15°\varphi_{\max} = 15°φmax​=15°, or 0–30° ≥ 0.055 m·rad when φmax⁡≥30°\varphi_{\max} \ge 30°φmax​≥30°, with linear interpolation between; GZ ≥ 0.20 m at ≥ 30°; φmax⁡\varphi_{\max}φmax​ ≥ 15°; GM0 ≥ 0.15 m.
  • Anchor handling (Part B Ch. 2.7, from 2020) and towing (Ch. 2.8) add heeling-lever based criteria.
  • Lifting operations (Part B Ch. 2.9): residual GM, residual area and heel angle limits during lifting.

Classification society and flag state layering

DNV Pt.3 Ch.15 refers to the IS Code and adds class notations; the Norwegian Maritime Authority applies the IS Code through its regulations on construction of cargo ships and fishing vessels, with national additions (e.g. fishing vessels — Section 5.13).

Formulas

01Area criterion 0–30°
∫030°GZ dφ ≥ 0.055 m⋅rad\int_{0}^{30°} GZ\,d\varphi \ \ge\ 0.055\ \text{m·rad}∫030°​GZdφ ≥ 0.055 m⋅rad

Result unit m·rad

02Area criterion 0–40° (or to downflooding)
∫0min⁡(40°, φf)GZ dφ ≥ 0.090 m⋅rad\int_{0}^{\min(40°,\ \varphi_f)} GZ\,d\varphi \ \ge\ 0.090\ \text{m·rad}∫0min(40°, φf​)​GZdφ ≥ 0.090 m⋅rad
SymbolDescriptionUnit
φf\varphi_fφf​Angle of downfloodingdeg

Result unit m·rad

03Area criterion 30–40°
∫30°min⁡(40°, φf)GZ dφ ≥ 0.030 m⋅rad\int_{30°}^{\min(40°,\ \varphi_f)} GZ\,d\varphi \ \ge\ 0.030\ \text{m·rad}∫30°min(40°, φf​)​GZdφ ≥ 0.030 m⋅rad

Result unit m·rad

04Minimum righting lever
GZ(φ) ≥ 0.20 mfor some φ≥30°GZ(\varphi) \ \ge\ 0.20\ \text{m} \quad \text{for some } \varphi \ge 30°GZ(φ) ≥ 0.20 mfor some φ≥30°

Result unit m

05Angle of maximum righting lever
φGZmax⁡ ≥ 25°\varphi_{GZ_{\max}} \ \ge\ 25°φGZmax​​ ≥ 25°

Result unit deg

06Minimum initial metacentric height
GM0 ≥ 0.15 mGM_0 \ \ge\ 0.15\ \text{m}GM0​ ≥ 0.15 m
SymbolDescriptionUnit
GM0GM_0GM0​Initial metacentric height corrected for free surface effectsm

Result unit m

Tables

IMO 2008 IS Code — general intact stability criteria (Part A, Ch. 2.2)

No.CriterionLimitIS Code reference
1Area under GZ curve, 0° to 30°≥ 0.055 m·radPart A 2.2.1
2Area under GZ curve, 0° to 40° or φf≥ 0.090 m·radPart A 2.2.1
3Area under GZ curve, 30° to 40° or φf≥ 0.030 m·radPart A 2.2.1
4Righting lever GZ at heel ≥ 30°≥ 0.20 mPart A 2.2.2
5Angle of maximum GZ≥ 25° (preferably > 30°)Part A 2.2.3
6Initial GM0, free-surface corrected≥ 0.15 mPart A 2.2.4
7Severe wind and rolling (weather criterion)Area b ≥ area a; steady wind heel ≤ 16° or 80 % deck-edge immersionPart A 2.3
Source: IMO International Code on Intact Stability, 2008 (Res. MSC.267(85)) as amended, Part A, Chapter 2. Mandatory under SOLAS II-1/5 and ICLL 1988 Protocol.

Icing allowances (IS Code Part B, Ch. 6.3)

SurfaceAllowance
Exposed weather decks and gangways30 kg/m²
Projected lateral area of each side above the waterplane7.5 kg/m²
Discontinuous surfaces (rails, spars, rigging)+5 % of projected lateral area; moment +10 %
Source: IMO IS Code 2008 Part B Ch. 6.3.1–6.3.2; fishing vessels Ch. 6.3.3 (double allowances may be required by the Administration for certain areas).

Examples

#01

Compliance check of the example vessel against the general criteria

Worked example

Problem

From Examples 5.4 and 5.5: GM0GM_0GM0​ (fluid) = 0.70 m, GZ30GZ_{30}GZ30​ = 0.485 m, GZmax⁡GZ_{\max}GZmax​ ≈ 0.54 m at ≈ 40°, areas 0–30° = 0.1166, 0–40° = 0.2092, 30–40° = 0.0926 m·rad. Downflooding angle φf\varphi_fφf​ = 55°. Check against IS Code Part A Ch. 2.2.

Solution

CriterionRequiredActualMarginResult
Area 0–30°≥ 0.055 m·rad0.1166+112 %Pass
Area 0–40° (φf\varphi_fφf​ = 55° > 40°, so 40° applies)≥ 0.090 m·rad0.2092+132 %Pass
Area 30–40°≥ 0.030 m·rad0.0926+209 %Pass
GZ at ≥ 30°≥ 0.20 m0.485 at 30°+143 %Pass
Angle of GZmax≥ 25°≈ 40°—Pass
GM0≥ 0.15 m0.70+367 %Pass

All general criteria are satisfied with ample margin in this condition. The weather criterion (Section 5.7) and, for a PSV, the Part B Ch. 2.4 provisions must also be checked; for compliance the check must be repeated for every loading condition in the booklet, including the departure and arrival conditions with deck cargo and the worst icing case.

References

IMO International Code on Intact Stability, 2008 (Res. MSC.267(85)), as amendedClause Part A, Ch. 2.2 (General criteria), Ch. 2.3 (Weather criterion), Ch. 3; Part B Ch. 2.4 (OSV), 2.7 (anchor handling), 2.8 (towing), 2.9 (lifting), Ch. 6 (icing)Mandatory

Part A mandatory; Part B recommendatory but applied by Administrations. Check the latest consolidated edition with amendments (MSC.398(95), MSC.415(97), MSC.443(99) etc.).

SOLAS 1974, Ch. II-1Clause Reg. 5, 5-1 (Stability information) — makes IS Code Part A mandatoryMandatory
DNV Rules for Classification — Ships, Pt.3 Ch.15 (Stability)Clause Sec. 1–2Mandatory

Class implementation; check the edition in force.