NavArchHandbook0 ch

No chapters yet.

Engineering tools
NavArchHandbook
NavArchHandbook
↵
BookmarksTools
Home›5. Stability›5.5 Dynamic stability and the area under the GZ curve

Chapter 5 / Section 5.5

Dynamic stability and the area under the GZ curve

Print this section

Definition

The dynamical stability at angle φ\varphiφ is the work done in heeling the ship from upright to φ\varphiφ:

E(φ)=Δ g∫0φGZ dφ[kN⋅m]E(\varphi) = \Delta\,g\int_0^{\varphi} GZ\,d\varphi \qquad [\text{kN·m}]E(φ)=Δg∫0φ​GZdφ[kN⋅m]

with φ\varphiφ in radians. The integral alone, ∫GZ dφ\int GZ\,d\varphi∫GZdφ in m·rad, is called the area under the GZ curve and is the quantity used by the IS Code criteria. 1 m·rad = 57.3 m·deg.

Physical meaning

A heeling moment that acts suddenly (gust, wave, shifted cargo) supplies energy; the ship heels until the energy absorbed (area under GZGZGZ above the heeling lever) equals the energy supplied (area under the heeling lever). Dynamic criteria therefore compare areas, not levers. This is the basis of the weather criterion (Section 5.7) and of the towline and crane criteria in class rules.

Computing the areas

Tabulate GZGZGZ at equal intervals (10° or, better, 5°) and integrate with Simpson's rules, converting the interval to radians. For the IS Code areas:

  • 0°0°0°–30°30°30°: three 10° intervals → Simpson's second rule, or six 5° intervals → first rule.
  • 0°0°0°–40°40°40°: four 10° intervals → first rule.
  • 30°30°30°–40°40°40°: difference of the two, or the 5–8–1 rule on 30°, 40°, 50°, or the trapezoidal rule when 5° steps are available.

If the downflooding angle φf\varphi_fφf​ is less than 40°, the IS Code replaces 40° by φf\varphi_fφf​ in the area criteria.

Residual dynamic stability

Under a steady heeling lever lhl_hlh​, the ship's reserve of dynamic stability is the area between the GZGZGZ curve and lhl_hlh​ from the static heel angle to the lesser of the second intersection, the downflooding angle, or 50° (the limiting angle varies by criterion).

Formulas

01Dynamical stability (energy)
E(φ)=Δ g∫0φGZ dφE(\varphi) = \Delta\, g \int_0^{\varphi} GZ\, d\varphiE(φ)=Δg∫0φ​GZdφ
SymbolDescriptionUnit
EEEWork done to heel the ship to angle φkN·m (= kJ)
φ\varphiφHeel anglerad

Result unit kN·m

02Area under the GZ curve (Simpson, 10° intervals, 0–40°)
A0−40=h3(GZ0+4GZ10+2GZ20+4GZ30+GZ40),h=10π180=0.17453 radA_{0-40} = \frac{h}{3}\left(GZ_0 + 4GZ_{10} + 2GZ_{20} + 4GZ_{30} + GZ_{40}\right), \qquad h = \frac{10\pi}{180} = 0.17453\ \text{rad}A0−40​=3h​(GZ0​+4GZ10​+2GZ20​+4GZ30​+GZ40​),h=18010π​=0.17453 rad
SymbolDescriptionUnit
GZφGZ_{\varphi}GZφ​Righting lever at heel φm

Result unit m·rad

03Area under the GZ curve (Simpson's second rule, 0–30°)
A0−30=3h8(GZ0+3GZ10+3GZ20+GZ30)A_{0-30} = \frac{3h}{8}\left(GZ_0 + 3GZ_{10} + 3GZ_{20} + GZ_{30}\right)A0−30​=83h​(GZ0​+3GZ10​+3GZ20​+GZ30​)

Result unit m·rad

04Conversion of area units
1 m⋅rad=57.30 m⋅deg1\ \text{m·rad} = 57.30\ \text{m·deg}1 m⋅rad=57.30 m⋅deg

Result unit -

Examples

#01

Areas under the GZ curve of the example vessel

Worked example

Problem

Using the GZ values of Example 5.4 (GZ0=0GZ_{0}=0GZ0​=0, GZ10=0.128GZ_{10}=0.128GZ10​=0.128, GZ20=0.304GZ_{20}=0.304GZ20​=0.304, GZ30=0.485GZ_{30}=0.485GZ30​=0.485, GZ40=0.536GZ_{40}=0.536GZ40​=0.536 m), compute the areas 0–30°, 0–40° and 30–40° in m·rad, and the dynamical stability at 40° for Δ=6314\Delta = 6314Δ=6314 t.

Solution

h=10°=0.17453h = 10° = 0.17453h=10°=0.17453 rad.

0–30° (second rule): A=3×0.174538(0+3×0.128+3×0.304+0.485)=0.06545×1.781=0.1166A = \dfrac{3 \times 0.17453}{8}(0 + 3 \times 0.128 + 3 \times 0.304 + 0.485) = 0.06545 \times 1.781 = 0.1166A=83×0.17453​(0+3×0.128+3×0.304+0.485)=0.06545×1.781=0.1166 m·rad.

0–40° (first rule): A=0.174533(0+4×0.128+2×0.304+4×0.485+0.536)=0.05818×3.596=0.2092A = \dfrac{0.17453}{3}(0 + 4 \times 0.128 + 2 \times 0.304 + 4 \times 0.485 + 0.536) = 0.05818 \times 3.596 = 0.2092A=30.17453​(0+4×0.128+2×0.304+4×0.485+0.536)=0.05818×3.596=0.2092 m·rad.

30–40°: 0.2092−0.1166=0.09260.2092 - 0.1166 = 0.09260.2092−0.1166=0.0926 m·rad (trapezoidal check: (0.485+0.536)/2×0.17453=0.0891(0.485 + 0.536)/2 \times 0.17453 = 0.0891(0.485+0.536)/2×0.17453=0.0891 m·rad — the small difference comes from the curvature).

Dynamical stability at 40°: E=6314×9.81×0.2092=12,960E = 6314 \times 9.81 \times 0.2092 = 12{,}960E=6314×9.81×0.2092=12,960 kN·m ≈ 13.0 MJ.

References

IMO IS Code 2008Clause Part A, Ch. 2.2.1–2.2.3 (Area criteria)Mandatory
Rawson & Tupper (2001)Clause Vol. 1, Ch. 4 (Dynamical stability)Textbook
Previous · 5.4Stability at large angles: GZ curves, cross curves (KN)Next · 5.6IMO 2008 IS Code: general intact stability criteria

Version 2 · last updated 19 Nov 2026 · Editor

On this page

  • Definition
  • Physical meaning
  • Computing the areas
  • Residual dynamic stability
  • Formulas
  • Examples
  • References

Applicable standards

  • IMO IS Code 2008

    Part A, Ch. 2.2.1–2.2.3 (Area criteria)

  • Rawson & Tupper (2001)

    Vol. 1, Ch. 4 (Dynamical stability)

NavArch Handbook·About & disclaimerFeedbackBookmarks© Jadrija Maritime j.d.o.o.