Chapter 5 / Section 5.14
Loading conditions and the stability booklet
Purpose
The stability booklet (stability information, trim and stability booklet) is the approved document that allows the master to assess the stability of the ship in any operating condition. It is required by SOLAS II-1 Reg. 5-1, ICLL Reg. 10, the IS Code (Part B Ch. 3.6) and class rules; the Administration (or class on its behalf) approves it after the inclining test.
Standard loading conditions (IS Code Part B Ch. 3.4)
At minimum, for a cargo ship:
- Ship in the fully loaded departure condition, homogeneous cargo, full stores and fuel.
- Fully loaded arrival condition, 10 % stores and fuel.
- Ballast departure condition, no cargo, full stores and fuel.
- Ballast arrival condition, 10 % stores and fuel. Plus, as applicable: deck cargo conditions, intermediate conditions where the worst case may occur (e.g. partly used fuel with slack tanks), lightship, docking condition, conditions with cranes in operation, towing, anchor handling, icing. For PSVs: conditions with deck cargo at maximum permissible KG, liquid cargo in cargo tanks (mud, brine) at various fillings, and the worst combination. Fishing vessels: see Section 5.13. Passenger ships: full load with passengers and crowding cases.
Content of the booklet (IS Code Part B Ch. 3.6 — summary)
- General particulars, GA, capacity plan, tank plan with sounding tables, centroids and free surface moments for each tank at various fillings.
- Hydrostatic tables and curves (incl. trims); cross curves (KN); downflooding angles and their openings; deck-edge immersion curve.
- Lightship data from the inclining test (with the test report reference).
- Each loading condition: table of all masses with , , , FSM; resulting , draughts, trim, , , , ; GZ curve with heeling levers; criteria table with pass/fail; longitudinal strength check where required (SWBM and SF against permissible).
- Maximum allowable KG (or minimum GM) curve against displacement/draught — the master's primary tool.
- Operational guidance: tanks to be kept full, instructions for liquid cargo, deck cargo limits, icing, hints for maintaining stability.
- For damage stability, where applicable: damage control plan/booklet reference and maximum KG curve for damage.
Allowable KG curve
For each displacement, the maximum (fluid) at which all criteria are just met; the governing criterion changes with draught (often GM0 at light draughts, area 30–40° or weather criterion at full load). Produced by the stability software by iterating KG at each displacement and trim. Presented as a curve or table; the master's loading computer compares the actual against it.
Loading instruments
An approved loading computer (class type-approved, with test conditions) may supplement — not replace — the booklet. Test conditions from the booklet must be reproduced within specified tolerances at the annual survey.
Check-list for the designer before submission
- Lightship from the inclining report, with the agreed margin if required (Administrations may add e.g. 2 % of lightship or a KG margin for certain ship types).
- Every tank with correct density and FSM at 50 % and at the actual filling.
- Downflooding points identified from the GA (vents, doors, hatches not weathertight) with their coordinates.
- KN curves computed free-to-trim with the correct buoyant volumes (watertight superstructures only).
- All loading conditions compliant; the worst condition identified and explained.
- Longitudinal strength check against permissible values.
- Booklet format per the Administration's requirements (NMA: Norwegian or English acceptable for Norwegian-flagged vessels; check).
Formulas
| Symbol | Description | Unit |
|---|---|---|
| Mass of each item (lightship, cargo, tanks, stores, crew) | t | |
| Height of its centre of gravity | m | |
| Free surface moment of each slack tank | t·m |
Result unit m
| Symbol | Description | Unit |
|---|---|---|
| Longitudinal position of each item (from AP or midship) | m |
Result unit cm
Result unit m
The overall allowable KG is the minimum over all criteria at the displacement considered.
Tables
Standard loading conditions by ship type (minimum set)
| Ship type | Conditions | Source |
|---|---|---|
| Cargo ship | Full load dep./arr.; ballast dep./arr.; deck cargo; intermediate worst case | IS Code Part B 3.4.1 |
| Offshore supply vessel | As cargo ship + deck cargo at max. permissible KG; liquid cargo tank fillings (mud, brine) incl. worst free surface; crane operation; anchor handling/towing where applicable | IS Code Part B 2.4, 2.7, 2.8, 3.4; OSV Guidelines MSC.235(82) |
| Fishing vessel | Dep. to grounds full fuel/ice/gear; dep. from grounds full catch; arr. full catch 10 % stores; arr. 20 % catch 10 % stores; each with icing where applicable | IS Code Part B 2.1.2; Torremolinos III/7 |
| Passenger ship | As cargo ship with full passengers; crowding; turning; lifeboat launching heel | IS Code Part B 3.1.2, 3.4.1 |
| Tug | Full load/ballast dep./arr.; towing with max. bollard pull heeling lever | IS Code Part B 2.8 |
References
Applied as mandatory by Administrations via SOLAS II-1/5-1.
Check the edition in force.
Version 2 · last updated 19 Nov 2026 · Editor