Chapter 5 / Section 5.8
Longitudinal stability and trim
Longitudinal metacentre
The longitudinal metacentric height is large (of the order of the ship length), so a ship is never unstable longitudinally; the interest is in trim, the difference between the aft and forward draughts.
Trim about the centre of flotation
A ship trims about a transverse axis through the LCF. A longitudinal moment [t·m] produces a change of trim
and the change is distributed between the ends in proportion to their distance from the LCF:
where is the distance of the LCF forward of midship (negative if aft) and . Forward and aft changes have opposite signs.
Equilibrium trim from LCG and LCB
For a given loading condition the ship floats with vertically above . With from the hydrostatics at the displacement:
(positive = by the stern when is aft of , with distances positive forward). This is the basic equation of every loading condition in the stability booklet.
Shifting a mass longitudinally
Moving by a distance changes the trim by [cm]; the displacement and mean draught do not change.
Adding or removing a mass
- Bodily sinkage (or rise) [cm], treated as if the mass were placed at the LCF (no trim change).
- Then trim change [cm], where is the position of the mass from midship.
- New draughts initial sinkage trim distribution. For large masses (> ~ 10 % of ) use the hydrostatics at the new displacement and iterate.
Trim to a specified draught
To achieve a required draught at one end (e.g. to clear a bar, to immerse the propeller), solve the above for the required moment, then for the mass to be moved or ballast to be added at a known position.
Hogging, sagging and draught survey
The mean of the forward and aft draughts differs from the midship draught when the hull deflects. Draught surveys use the "mean of means" correction to estimate the equivalent level draught before entering the hydrostatic table.
Formulas
| Symbol | Description | Unit |
|---|---|---|
| Change of trim | cm | |
| Trimming moment about the LCF | t·m | |
| Moment to change trim 1 cm | t·m/cm |
Result unit cm
| Symbol | Description | Unit |
|---|---|---|
| LCF forward of midship (negative if aft) | m | |
| Length between perpendiculars | m |
Result unit cm
Signs: with δt positive by the head, forward draught increases and aft draught decreases.
| Symbol | Description | Unit |
|---|---|---|
| Trim (positive by the stern when LCG is aft of LCB, with x positive forward) | cm | |
| Longitudinal centre of gravity from midship | m | |
| Longitudinal centre of buoyancy at level keel for the displacement | m |
Result unit cm
| Symbol | Description | Unit |
|---|---|---|
| Mass shifted | t | |
| Longitudinal distance shifted | m |
Result unit cm
| Symbol | Description | Unit |
|---|---|---|
| Longitudinal position of the added mass from midship | m |
Result unit cm
Result unit m
| Symbol | Description | Unit |
|---|---|---|
| Midship draught (mean of port and starboard) | m |
Result unit m
Approximates the parabolic hog/sag deflection; used in UN ECE draught survey code.
Examples
Trim change from a longitudinal shift of mass
Worked example
Problem
Example vessel: m, t, t·m/cm, m (forward of midship), initial draughts m, m. A 100 t deck cargo module is moved 30.0 m forward. Find the new draughts.
Loading a mass: sinkage and trim
Worked example
Problem
Same vessel, level keel at m, t/cm. 150 t of fuel is loaded into a tank whose centroid is 32.0 m aft of midship. Find the new draughts.
References
Source of the mean-of-means and other draught survey corrections.
Version 2 · last updated 19 Nov 2026 · Editor