Chapter 4 / Section 4.6
Areas, moments, centroids and second moments of waterplanes and sections
The same Simpson table that gives an area also gives its first and second moments when each product is multiplied by the lever and the lever squared.
Waterplane (half-breadths at spacing along )
- Area:
- First moment about midship: →
- Second moment about a transverse axis through midship:
- Second moment about the transverse axis through the LCF (needed for ): (parallel axis theorem)
- Second moment about the centreline (needed for ):
Transverse section (half-breadths at waterline spacing along )
- Immersed area:
- Vertical moment about baseline: → centroid height
Volume and centroids of the immersed hull
- (from sectional areas) →
- (from waterplanes) →
Levers
Use levers in units of the interval in the table and multiply by (first moments) or (second moments) at the end: this keeps the arithmetic small and makes errors visible.
Formulas
| Symbol | Description | Unit |
|---|---|---|
| Transverse second moment of area of the waterplane | m^4 | |
| Half-breadth | m |
Result unit m^4
| Symbol | Description | Unit |
|---|---|---|
| Lever of station i from midship in units of h | - |
Result unit m^4
| Symbol | Description | Unit |
|---|---|---|
| Longitudinal second moment about the transverse axis through the centre of flotation | m^4 | |
| Distance of centre of flotation from midship | m |
Result unit m^4
| Symbol | Description | Unit |
|---|---|---|
| Longitudinal centre of buoyancy from the chosen origin | m |
Result unit m
| Symbol | Description | Unit |
|---|---|---|
| Height of centre of buoyancy above baseline | m |
Result unit m
Tables
Second moments of area of simple plane figures (about centroidal axes)
| Figure | about horizontal centroidal axis | Area |
|---|---|---|
| Rectangle | ||
| Triangle, base , height | ||
| Circle, diameter | ||
| Ellipse, semi-axes (horizontal), (vertical) | ||
| Rectangular waterplane about CL | ||
| Rectangular waterplane about midship |
Examples
#01
Transverse second moment and BM of the waterplane from Example 4.5
Worked example
Problem
Using the half-breadths of Example 4.5 (h = 10 m; y = 0, 3.2, 5.8, 7.4, 8.0, 8.0, 8.0, 7.6, 6.2, 3.8, 0.4 m) and a displacement volume m³, compute and the transverse metacentric radius .
References
Rawson & Tupper, Basic Ship Theory, 5th ed. (2001)Clause Vol. 1, Ch. 3 (Flotation and trim — hydrostatic data)Textbook
Schneekluth & Bertram (1998)Clause Ch. 1.6 and Appendix (empirical coefficients for waterplane inertia)Textbook
Version 2 · last updated 19 Nov 2026 · Editor