Back to section

NavArch Handbook

Chapter 4 / Section 4.6

Areas, moments, centroids and second moments of waterplanes and sections

The same Simpson table that gives an area also gives its first and second moments when each product is multiplied by the lever and the lever squared.

Waterplane (half-breadths yyy at spacing hhh along xxx)

  • Area: AWP=2∫y dxA_{WP} = 2\int y\,dxAWP​=2∫ydx
  • First moment about midship: Mx=2∫x y dxM_x = 2\int x\,y\,dxMx​=2∫xydx → LCF=Mx/AWPLCF = M_x / A_{WP}LCF=Mx​/AWP​
  • Second moment about a transverse axis through midship: I⊗=2∫x2y dxI_{\otimes} = 2\int x^2 y\,dxI⊗​=2∫x2ydx
  • Second moment about the transverse axis through the LCF (needed for BMLBM_LBML​): IL=I⊗−AWP LCF2I_L = I_{\otimes} - A_{WP}\,LCF^2IL​=I⊗​−AWP​LCF2 (parallel axis theorem)
  • Second moment about the centreline (needed for BMTBM_TBMT​): IT=23∫y3 dxI_T = \tfrac{2}{3}\int y^3\,dxIT​=32​∫y3dx

Transverse section (half-breadths yyy at waterline spacing hhh along zzz)

  • Immersed area: A=2∫y dzA = 2\int y\,dzA=2∫ydz
  • Vertical moment about baseline: Mz=2∫z y dzM_z = 2\int z\,y\,dzMz​=2∫zydz → centroid height =Mz/A= M_z/A=Mz​/A

Volume and centroids of the immersed hull

  • ∇=∫A(x) dx\nabla = \int A(x)\,dx∇=∫A(x)dx (from sectional areas) → LCB=∫x A(x) dx∇LCB = \dfrac{\int x\,A(x)\,dx}{\nabla}LCB=∇∫xA(x)dx​
  • ∇=∫AWP(z) dz\nabla = \int A_{WP}(z)\,dz∇=∫AWP​(z)dz (from waterplanes) → KB=∫z AWP(z) dz∇KB = \dfrac{\int z\,A_{WP}(z)\,dz}{\nabla}KB=∇∫zAWP​(z)dz​

Levers

Use levers in units of the interval hhh in the table and multiply by hhh (first moments) or h2h^2h2 (second moments) at the end: this keeps the arithmetic small and makes errors visible.

Formulas

01Second moment of waterplane about centreline
IT=23∫0Ly3 dx≈23⋅h3∑SMi yi3I_T = \frac{2}{3}\int_0^{L} y^3\,dx \approx \frac{2}{3}\cdot\frac{h}{3}\sum SM_i\, y_i^3IT​=32​∫0L​y3dx≈32​⋅3h​∑SMi​yi3​
SymbolDescriptionUnit
ITI_TIT​Transverse second moment of area of the waterplanem^4
yyyHalf-breadthm

Result unit m^4

02Second moment of waterplane about midship
I⊗=2∫0Lx2 y dx≈2⋅h3⋅h2∑SMi yi ℓi2I_{\otimes} = 2\int_0^{L} x^2\, y\,dx \approx 2\cdot\frac{h}{3}\cdot h^2 \sum SM_i\, y_i\, \ell_i^2I⊗​=2∫0L​x2ydx≈2⋅3h​⋅h2∑SMi​yi​ℓi2​
SymbolDescriptionUnit
ℓi\ell_iℓi​Lever of station i from midship in units of h-

Result unit m^4

03Parallel axis theorem (to LCF)
IL=I⊗−AWP (LCF)2I_L = I_{\otimes} - A_{WP}\, (LCF)^2IL​=I⊗​−AWP​(LCF)2
SymbolDescriptionUnit
ILI_LIL​Longitudinal second moment about the transverse axis through the centre of flotationm^4
LCFLCFLCFDistance of centre of flotation from midshipm

Result unit m^4

04Longitudinal centre of buoyancy
LCB=∫x A(x) dx∇LCB = \frac{\int x\,A(x)\,dx}{\nabla}LCB=∇∫xA(x)dx​
SymbolDescriptionUnit
LCBLCBLCBLongitudinal centre of buoyancy from the chosen originm

Result unit m

05Vertical centre of buoyancy
KB=∫0Tz AWP(z) dz∇KB = \frac{\int_0^T z\,A_{WP}(z)\,dz}{\nabla}KB=∇∫0T​zAWP​(z)dz​
SymbolDescriptionUnit
KBKBKBHeight of centre of buoyancy above baselinem

Result unit m

Tables

Second moments of area of simple plane figures (about centroidal axes)

FigureIII about horizontal centroidal axisArea
Rectangle b×hb \times hb×hbh312\dfrac{b h^3}{12}12bh3​bhbhbh
Triangle, base bbb, height hhhbh336\dfrac{b h^3}{36}36bh3​bh2\dfrac{bh}{2}2bh​
Circle, diameter dddπd464\dfrac{\pi d^4}{64}64πd4​πd24\dfrac{\pi d^2}{4}4πd2​
Ellipse, semi-axes aaa (horizontal), bbb (vertical)πab34\dfrac{\pi a b^3}{4}4πab3​πab\pi a bπab
Rectangular waterplane L×BL \times BL×B about CLLB312\dfrac{L B^3}{12}12LB3​LBLBLB
Rectangular waterplane L×BL \times BL×B about midshipBL312\dfrac{B L^3}{12}12BL3​LBLBLB
Source: Standard results; see Roark's Formulas for Stress and Strain, 8th ed. (2012), Appendix A.

Examples

#01

Transverse second moment and BM of the waterplane from Example 4.5

Worked example

Problem

Using the half-breadths of Example 4.5 (h = 10 m; y = 0, 3.2, 5.8, 7.4, 8.0, 8.0, 8.0, 7.6, 6.2, 3.8, 0.4 m) and a displacement volume ∇=6160\nabla = 6160∇=6160 m³, compute ITI_TIT​ and the transverse metacentric radius BMTBM_TBMT​.

Solution

Cube the half-breadths and apply the first rule:

Stnyyyy3y^3y3SMy3⋅SMy^3 \cdot SMy3⋅SM
00.00.00010.000
13.232.7684131.072
25.8195.1122390.224
37.4405.22441620.896
48.0512.00021024.000
58.0512.00042048.000
68.0512.00021024.000
77.6438.97641755.904
86.2238.3282476.656
93.854.8724219.488
100.40.06410.064
Σ8690.30
IT=23⋅h3∑=23×103×8690.30=19,312 m4I_T = \frac{2}{3}\cdot\frac{h}{3}\sum = \frac{2}{3}\times\frac{10}{3}\times 8690.30 = 19{,}312\ \text{m}^4IT​=32​⋅3h​∑=32​×310​×8690.30=19,312 m4 BMT=IT∇=19,3126160=3.14 mBM_T = \frac{I_T}{\nabla} = \frac{19{,}312}{6160} = 3.14\ \text{m}BMT​=∇IT​​=616019,312​=3.14 m

Cross-check with the Schneekluth approximation IT≈CIT L B3I_T \approx C_{IT}\,L\,B^3IT​≈CIT​LB3 with CIT=0.1216 CWP−0.0410=0.1216×0.735−0.0410=0.0484C_{IT} = 0.1216\,C_{WP} - 0.0410 = 0.1216 \times 0.735 - 0.0410 = 0.0484CIT​=0.1216CWP​−0.0410=0.1216×0.735−0.0410=0.0484: IT≈0.0484×100×163=19,825I_T \approx 0.0484 \times 100 \times 16^3 = 19{,}825IT​≈0.0484×100×163=19,825 m⁴ (+2.7 %), which confirms the order of magnitude.

References

Rawson & Tupper, Basic Ship Theory, 5th ed. (2001)Clause Vol. 1, Ch. 3 (Flotation and trim — hydrostatic data)Textbook
Schneekluth & Bertram (1998)Clause Ch. 1.6 and Appendix (empirical coefficients for waterplane inertia)Textbook