Chapter 4 / Section 4.5
Simpson's rules and numerical integration of ship curves
Ship curves (waterlines, sectional area curves, GZ curves) are defined by tabulated ordinates at equal spacing . Their integrals are found with Simpson's rules, which fit a parabola through each group of ordinates.
Simpson's first rule (1–4–1)
Requires an even number of intervals (odd number of ordinates). Multipliers: 1, 4, 2, 4, 2, …, 4, 1.
Simpson's second rule (1–3–3–1)
Requires the number of intervals to be a multiple of three. Multipliers: 1, 3, 3, 2, 3, 3, 2, …, 3, 3, 1.
The 5–8–minus-1 rule
Gives the area between the first two of three equally spaced ordinates (useful for the area between two adjacent stations, e.g. for Bonjean work or the area 30°–40° under a GZ curve):
Trapezoidal rule
Less accurate for curved ordinates; acceptable for GZ-curve areas when ordinates are closely spaced (every 5°) and conservative when the curve is concave downward.
Practical rules
- Tabulate: Station | Ordinate | Simpson multiplier SM | Product | Lever | Product × lever | Product × lever².
- Half-stations at the ends: use multipliers ½, 2, 1½ … (i.e. the first-rule multipliers halved over the half-interval) or integrate the end portions separately with the 5–8–1 rule.
- For half-breadths, multiply the half-waterplane result by 2 for the full area.
- Check: for the first rule equals for intervals; the sum of products × levers about midship should be small for a well-balanced ship.
- Angles must be in radians when integrating GZ curves ( rad).
Formulas
| Symbol | Description | Unit |
|---|---|---|
| Area under the curve | m^2 (or as per ordinates) | |
| Common interval between ordinates | m | |
| Ordinate at station i | m | |
| Simpson multiplier | - | |
| Number of intervals (even) | - |
Result unit m^2
| Symbol | Description | Unit |
|---|---|---|
| Number of intervals (multiple of 3) | - |
Result unit m^2
| Symbol | Description | Unit |
|---|---|---|
| Three consecutive equally spaced ordinates | m |
Result unit m^2
Result unit m^2
Tables
Simpson multipliers for common numbers of intervals
| Intervals n | Rule | Multipliers | Factor |
|---|---|---|---|
| 2 | First | 1 4 1 | h/3 |
| 4 | First | 1 4 2 4 1 | h/3 |
| 6 | First | 1 4 2 4 2 4 1 | h/3 |
| 8 | First | 1 4 2 4 2 4 2 4 1 | h/3 |
| 10 | First | 1 4 2 4 2 4 2 4 2 4 1 | h/3 |
| 3 | Second | 1 3 3 1 | 3h/8 |
| 6 | Second | 1 3 3 2 3 3 1 | 3h/8 |
| 9 | Second | 1 3 3 2 3 3 2 3 3 1 | 3h/8 |
| 20 (half-stations at ends: 0, ½, 1 … 9, 9½, 10) | First with half-intervals | ½ 2 1½ 4 2 4 2 4 2 4 2 4 2 4 2 4 2 4 1½ 2 ½ | h/3 |
Examples
Waterplane area, LCF and TPC by Simpson's first rule
Worked example
Problem
A ship of m has the following half-breadths [m] of the design waterplane at 11 equally spaced stations from AP (station 0) to FP (station 10): 0, 3.2, 5.8, 7.4, 8.0, 8.0, 8.0, 7.6, 6.2, 3.8, 0.4. Calculate the waterplane area, the position of the centre of flotation relative to midship, and the TPC in seawater.
References
Version 2 · last updated 19 Nov 2026 · Editor