Chapter 4 / Section 4.4
Displacement, volume and Archimedes' principle
Archimedes' principle
A floating body displaces a volume of fluid whose weight equals the weight of the body. In equilibrium:
- the buoyancy force equals the weight ;
- the centre of buoyancy (centroid of the immersed volume) and the centre of gravity lie on the same vertical line.
In naval architecture the mass form is used: with in tonnes, in t/m³ and in m³. Forces, where needed, are in kN when is in tonnes.
Computing the displacement volume
- From the sectional area curve: , integrated numerically (Simpson's rules, Section 4.5).
- From the waterplane areas: — this is the basis of the displacement curve against draught.
- From Bonjean curves (Section 4.10) for any trimmed or hogged/sagged waterline.
The two integrations (1) and (2) must agree within about 0.1 %; a larger difference indicates an offsets or multiplier error.
Displacement curve and TPC
The displacement curve is drawn on the hydrostatic curves. Its slope at any draught is the tonnes per centimetre immersion (Section 4.8): .
Lightship, deadweight and loading
where are the deadweight items (cargo, fuel, fresh water, ballast, stores, crew and effects). Each item carries its own centre of gravity for the stability calculation (Chapter 5).
Reserve buoyancy
Volume of the watertight hull above the waterline, usually expressed as a percentage of . It is the physical basis of the freeboard requirement and of damage stability.
Formulas
| Symbol | Description | Unit |
|---|---|---|
| Water density | t/m^3 | |
| Gravitational acceleration (9.81) | m/s^2 | |
| Immersed volume | m^3 | |
| Mass of the ship and everything on board | t |
Result unit t
| Symbol | Description | Unit |
|---|---|---|
| Immersed cross-sectional area at longitudinal position x | m^2 |
Result unit m^3
| Symbol | Description | Unit |
|---|---|---|
| Waterplane area at height z above baseline | m^2 |
Result unit m^3
| Symbol | Description | Unit |
|---|---|---|
| Buoyancy force | kN | |
| Mass displacement | t |
Result unit kN
1 t × 9.81 m/s² = 9.81 kN.
Tables
Water density values used in hydrostatics
| Water | Density [t/m³] | Specific volume [m³/t] | Note |
|---|---|---|---|
| Standard seawater (ICLL) | 1.025 | 0.9756 | Used for load line and class hydrostatics |
| Fresh water | 1.000 | 1.000 | Rivers, lakes, FW tanks |
| Baltic Sea (brackish, typical) | 1.005–1.012 | 0.988–0.995 | Varies with location and season |
| Dock water (typical estuary) | 1.010–1.020 | 0.980–0.990 | Measure with hydrometer before draught survey |
| Dead Sea | 1.24 | 0.806 | Extreme example |
Examples
Displacement from form coefficients
Worked example
Problem
Estimate the seawater displacement of a fishing vessel with m, m, m and . Add 1.5 % for shell and appendages.
References
Version 2 · last updated 19 Nov 2026 · Editor