NavArch Handbook
Chapter 4 / Section 4.4
A floating body displaces a volume of fluid whose weight equals the weight of the body. In equilibrium:
In naval architecture the mass form is used: with in tonnes, in t/m³ and in m³. Forces, where needed, are in kN when is in tonnes.
The two integrations (1) and (2) must agree within about 0.1 %; a larger difference indicates an offsets or multiplier error.
The displacement curve is drawn on the hydrostatic curves. Its slope at any draught is the tonnes per centimetre immersion (Section 4.8): .
where are the deadweight items (cargo, fuel, fresh water, ballast, stores, crew and effects). Each item carries its own centre of gravity for the stability calculation (Chapter 5).
Volume of the watertight hull above the waterline, usually expressed as a percentage of . It is the physical basis of the freeboard requirement and of damage stability.
| Symbol | Description | Unit |
|---|---|---|
| Water density | t/m^3 | |
| Gravitational acceleration (9.81) | m/s^2 | |
| Immersed volume | m^3 | |
| Mass of the ship and everything on board | t |
Result unit t
| Symbol | Description | Unit |
|---|---|---|
| Immersed cross-sectional area at longitudinal position x | m^2 |
Result unit m^3
| Symbol | Description | Unit |
|---|---|---|
| Waterplane area at height z above baseline | m^2 |
Result unit m^3
| Symbol | Description | Unit |
|---|---|---|
| Buoyancy force | kN | |
| Mass displacement | t |
Result unit kN
1 t × 9.81 m/s² = 9.81 kN.
| Water | Density [t/m³] | Specific volume [m³/t] | Note |
|---|---|---|---|
| Standard seawater (ICLL) | 1.025 | 0.9756 | Used for load line and class hydrostatics |
| Fresh water | 1.000 | 1.000 | Rivers, lakes, FW tanks |
| Baltic Sea (brackish, typical) | 1.005–1.012 | 0.988–0.995 | Varies with location and season |
| Dock water (typical estuary) | 1.010–1.020 | 0.980–0.990 | Measure with hydrometer before draught survey |
| Dead Sea | 1.24 | 0.806 | Extreme example |
Worked example
Problem
Estimate the seawater displacement of a fishing vessel with m, m, m and . Add 1.5 % for shell and appendages.