Back to section

NavArch Handbook

Chapter 1 / Section 1.7

Vectors, moments and equilibrium of forces

Trigonometry needed for ship geometry

  • sin⁡2θ+cos⁡2θ=1\sin^2\theta + \cos^2\theta = 1sin2θ+cos2θ=1; tan⁡θ=sin⁡θ/cos⁡θ\tan\theta = \sin\theta/\cos\thetatanθ=sinθ/cosθ.
  • Small angles (θ\thetaθ in rad, θ<0.1\theta < 0.1θ<0.1 rad ≈ 6°): sin⁡θ≈tan⁡θ≈θ\sin\theta \approx \tan\theta \approx \thetasinθ≈tanθ≈θ, cos⁡θ≈1−θ2/2\cos\theta \approx 1 - \theta^2/2cosθ≈1−θ2/2. Basis of the metacentric theory (GZ=GMsin⁡φ≈GM φGZ = GM\sin\varphi \approx GM\,\varphiGZ=GMsinφ≈GMφ) and of the trim relation (t=Ltan⁡θ≈Lθt = L\tan\theta \approx L\thetat=Ltanθ≈Lθ).
  • Law of cosines: c2=a2+b2−2abcos⁡γc^2 = a^2 + b^2 - 2ab\cos\gammac2=a2+b2−2abcosγ; law of sines: a/sin⁡α=b/sin⁡β=c/sin⁡γa/\sin\alpha = b/\sin\beta = c/\sin\gammaa/sinα=b/sinβ=c/sinγ — for mooring line geometry and crane boom triangles.
  • Heeled waterline: a point at height zzz above the keel and offset yyy from the centreline has, at heel φ\varphiφ, a height above the heeled waterplane of zcos⁡φ−ysin⁡φz\cos\varphi - y\sin\varphizcosφ−ysinφ (measured from the intersection of the waterline with the centreline). Deck-edge immersion: tan⁡φDE=f/(B/2)\tan\varphi_{DE} = f/(B/2)tanφDE​=f/(B/2) with fff the freeboard.

Vectors

A force F=(Fx,Fy,Fz)\mathbf F = (F_x, F_y, F_z)F=(Fx​,Fy​,Fz​); magnitude ∣F∣=Fx2+Fy2+Fz2|\mathbf F| = \sqrt{F_x^2 + F_y^2 + F_z^2}∣F∣=Fx2​+Fy2​+Fz2​​; direction cosines Fx/∣F∣F_x/|\mathbf F|Fx​/∣F∣ etc. In two dimensions Fx=Fcos⁡αF_x = F\cos\alphaFx​=Fcosα, Fy=Fsin⁡αF_y = F\sin\alphaFy​=Fsinα with α\alphaα from the x-axis.

  • Resultant: R=∑Fi\mathbf R = \sum \mathbf F_iR=∑Fi​ (add components).
  • Dot product a⋅b=∣a∣∣b∣cos⁡θ\mathbf a \cdot \mathbf b = |\mathbf a||\mathbf b|\cos\thetaa⋅b=∣a∣∣b∣cosθ (component of a force along a direction, work).
  • Cross product a×b\mathbf a \times \mathbf ba×b (moment of a force): MO=r×F\mathbf M_O = \mathbf r \times \mathbf FMO​=r×F; in 2D MO=xFy−yFxM_O = x F_y - y F_xMO​=xFy​−yFx​ (counter-clockwise positive).

Moment of a force, couples

Moment about a point = force × perpendicular distance. A couple (two equal and opposite forces) has the same moment about every point — the righting couple Δg⋅GZ\Delta g \cdot GZΔg⋅GZ is a couple. Moments about an axis: component of r×F\mathbf r \times \mathbf Fr×F along the axis (heeling moment about the longitudinal axis, trimming moment about the transverse axis through LCF, yawing moment about the vertical axis).

Equilibrium of a rigid body

∑Fx=0,∑Fy=0,∑Fz=0,∑Mx=0,∑My=0,∑Mz=0\sum F_x = 0, \quad \sum F_y = 0, \quad \sum F_z = 0, \qquad \sum M_x = 0, \quad \sum M_y = 0, \quad \sum M_z = 0∑Fx​=0,∑Fy​=0,∑Fz​=0,∑Mx​=0,∑My​=0,∑Mz​=0

In the plane: three equations (∑Fx\sum F_x∑Fx​, ∑Fy\sum F_y∑Fy​, ∑M\sum M∑M). A floating ship: ∑Fz=0\sum F_z = 0∑Fz​=0 gives Δ=ρ∇\Delta = \rho\nablaΔ=ρ∇; ∑Mx=0\sum M_x = 0∑Mx​=0 gives zero heel when TCG=0TCG = 0TCG=0; ∑My=0\sum M_y = 0∑My​=0 gives LCG=LCBLCG = LCBLCG=LCB (trim equation, Section 5.8). Support reactions of beams (Section 2.3) and block reactions in docking (Section 5.11) are found from the same three equations.

Free-body diagrams

Isolate the body, draw all external forces (weights, buoyancy, reactions, line tensions, pressures replaced by their resultants), choose axes, write the equilibrium equations. Every foundation, bracket and lifting calculation in this handbook starts with a free-body diagram.

Centre of gravity of a system of masses

xˉ=∑mixi∑mi,yˉ=∑miyi∑mi,zˉ=∑mizi∑mi\bar x = \frac{\sum m_i x_i}{\sum m_i}, \quad \bar y = \frac{\sum m_i y_i}{\sum m_i}, \quad \bar z = \frac{\sum m_i z_i}{\sum m_i}xˉ=∑mi​∑mi​xi​​,yˉ​=∑mi​∑mi​yi​​,zˉ=∑mi​∑mi​zi​​

The loading condition table of the stability booklet (Section 5.14) is exactly this computation.

Formulas

01Components and magnitude of a force (2D)
Fx=Fcos⁡α,Fy=Fsin⁡α,F=Fx2+Fy2,α=atan2⁡(Fy,Fx)F_x = F\cos\alpha, \quad F_y = F\sin\alpha, \quad F = \sqrt{F_x^2 + F_y^2}, \quad \alpha = \operatorname{atan2}(F_y, F_x)Fx​=Fcosα,Fy​=Fsinα,F=Fx2​+Fy2​​,α=atan2(Fy​,Fx​)
SymbolDescriptionUnit
FFFMagnitude of the forcekN
α\alphaαAngle from the positive x-axis, counter-clockwisedeg

Result unit kN

02Moment of a force about a point (2D)
MO=x Fy−y FxM_O = x\,F_y - y\,F_xMO​=xFy​−yFx​
SymbolDescriptionUnit
(x,y)(x, y)(x,y)Position of the point of application relative to Om
MOM_OMO​Moment about O, counter-clockwise positivekN·m

Result unit kN·m

03Moment of a force about a point (3D)
MO=r×F\mathbf M_O = \mathbf r \times \mathbf FMO​=r×F
SymbolDescriptionUnit
r\mathbf rrPosition vector from O to the point of applicationm

Result unit kN·m

04Equilibrium of a rigid body
∑F=0,∑MO=0\sum \mathbf F = \mathbf 0, \qquad \sum \mathbf M_O = \mathbf 0∑F=0,∑MO​=0

Result unit -

05Small-angle approximations
sin⁡θ≈tan⁡θ≈θ,cos⁡θ≈1−θ22(θ in rad)\sin\theta \approx \tan\theta \approx \theta, \qquad \cos\theta \approx 1 - \frac{\theta^2}{2} \quad (\theta \text{ in rad})sinθ≈tanθ≈θ,cosθ≈1−2θ2​(θ in rad)

Result unit -

Error of sin θ ≈ θ is 0.5 % at 10°, 1.1 % at 15°.

06Height of a point above the heeled waterline
z′=zcos⁡φ−ysin⁡φz' = z\cos\varphi - y\sin\varphiz′=zcosφ−ysinφ
SymbolDescriptionUnit
zzzHeight of the point above the upright waterlinem
yyyTransverse offset towards the low sidem
φ\varphiφHeel angledeg

Result unit m

Measured from the point where the heeled waterline crosses the centreline (constant-displacement waterline shifts slightly for non-wall-sided hulls).

07Angle of deck-edge immersion (wall-sided)
tan⁡φDE=fB/2\tan\varphi_{DE} = \frac{f}{B/2}tanφDE​=B/2f​
SymbolDescriptionUnit
fffFreeboard to the deck edgem
BBBBreadthm

Result unit deg

08Centre of gravity of a system of masses
zˉ=∑mizi∑mi\bar z = \frac{\sum m_i z_i}{\sum m_i}zˉ=∑mi​∑mi​zi​​
SymbolDescriptionUnit
mim_imi​Mass of item it
ziz_izi​Coordinate of its centre of gravitym

Result unit m

Tables

Trigonometric values used in stability work

Angle φ [°]φ [rad]sin φcos φtan φsin φ − φ (error of small-angle approx.)
50.087270.087160.996190.08749−0.1 %
100.174530.173650.984810.17633−0.5 %
150.261800.258820.965930.26795−1.1 %
200.349070.342020.939690.36397−2.0 %
250.436330.422620.906310.46631−3.1 %
300.523600.500000.866030.57735−4.5 %
400.698130.642790.766040.83910−7.9 %
500.872660.766040.642791.19175−12.2 %
601.047200.866030.500001.73205−17.3 %
Source: Computed.

Examples

#01

Resultant of two mooring line forces and its moment about the ship's centre

Worked example

Problem

Two mooring lines act on a pontoon in the horizontal plane. Line 1: 80 kN at 30° from the x-axis (forward), applied at the point (20 m, 0). Line 2: 120 kN at 150°, applied at (−15 m, 0). Find the resultant force, its direction, and the yawing moment about the origin.

Solution

Components:

F1x=80cos⁡30°=69.28F_{1x} = 80\cos 30° = 69.28F1x​=80cos30°=69.28 kN, F1y=80sin⁡30°=40.00F_{1y} = 80\sin 30° = 40.00F1y​=80sin30°=40.00 kN. F2x=120cos⁡150°=−103.92F_{2x} = 120\cos 150° = -103.92F2x​=120cos150°=−103.92 kN, F2y=120sin⁡150°=60.00F_{2y} = 120\sin 150° = 60.00F2y​=120sin150°=60.00 kN.

Resultant: Rx=−34.64R_x = -34.64Rx​=−34.64 kN, Ry=100.00R_y = 100.00Ry​=100.00 kN; R=34.642+1002=105.8R = \sqrt{34.64^2 + 100^2} = 105.8R=34.642+1002​=105.8 kN at α=atan2⁡(100,−34.64)=109.1°\alpha = \operatorname{atan2}(100, -34.64) = 109.1°α=atan2(100,−34.64)=109.1°.

Moment about O (M=xFy−yFxM = xF_y - yF_xM=xFy​−yFx​, all y=0y = 0y=0): M1=20×40.00=800M_1 = 20 \times 40.00 = 800M1​=20×40.00=800 kN·m; M2=(−15)×60.00=−900M_2 = (-15) \times 60.00 = -900M2​=(−15)×60.00=−900 kN·m. ∑MO=−100\sum M_O = -100∑MO​=−100 kN·m (clockwise). The pontoon is pushed to port-forward with a small clockwise yawing moment; a third line or a fender reaction must supply +34.64+34.64+34.64 kN in x, −100-100−100 kN in y and +100+100+100 kN·m for equilibrium.

#02

Deck-edge immersion angle of the example vessel

Worked example

Problem

Freeboard to the deck edge amidships 2.40 m, B=16B = 16B=16 m. Find the angle of deck-edge immersion and compare with the IS Code weather-criterion limit on static heel.

Solution

tan⁡φDE=2.40/8.0=0.300⇒φDE=16.7°\tan\varphi_{DE} = 2.40/8.0 = 0.300 \Rightarrow \varphi_{DE} = 16.7°tanφDE​=2.40/8.0=0.300⇒φDE​=16.7° (wall-sided; the real value, 27° in Example 5.7, is higher because of the flare and the higher freeboard forward and aft — the midship value is the conservative first estimate). The static heel limit is min⁡(16°,0.8×16.7°=13.4°)=13.4°\min(16°, 0.8 \times 16.7° = 13.4°) = 13.4°min(16°,0.8×16.7°=13.4°)=13.4° on this estimate.

References

Hibbeler, Engineering Mechanics: Statics, 14th ed. (2016)Clause Ch. 2 (Force vectors), Ch. 4 (Force system resultants), Ch. 5 (Equilibrium of a rigid body)Textbook
Rawson & Tupper, Basic Ship Theory, 5th ed. (2001)Clause Vol. 1, Ch. 4 (Stability — geometry of the heeled ship)Textbook
NavArch Handbook · Chapter 1 · printed on —