Chapter 1 / Section 1.7
Vectors, moments and equilibrium of forces
Trigonometry needed for ship geometry
- ; .
- Small angles ( in rad, rad ≈ 6°): , . Basis of the metacentric theory () and of the trim relation ().
- Law of cosines: ; law of sines: — for mooring line geometry and crane boom triangles.
- Heeled waterline: a point at height above the keel and offset from the centreline has, at heel , a height above the heeled waterplane of (measured from the intersection of the waterline with the centreline). Deck-edge immersion: with the freeboard.
Vectors
A force ; magnitude ; direction cosines etc. In two dimensions , with from the x-axis.
- Resultant: (add components).
- Dot product (component of a force along a direction, work).
- Cross product (moment of a force): ; in 2D (counter-clockwise positive).
Moment of a force, couples
Moment about a point = force × perpendicular distance. A couple (two equal and opposite forces) has the same moment about every point — the righting couple is a couple. Moments about an axis: component of along the axis (heeling moment about the longitudinal axis, trimming moment about the transverse axis through LCF, yawing moment about the vertical axis).
Equilibrium of a rigid body
In the plane: three equations (, , ). A floating ship: gives ; gives zero heel when ; gives (trim equation, Section 5.8). Support reactions of beams (Section 2.3) and block reactions in docking (Section 5.11) are found from the same three equations.
Free-body diagrams
Isolate the body, draw all external forces (weights, buoyancy, reactions, line tensions, pressures replaced by their resultants), choose axes, write the equilibrium equations. Every foundation, bracket and lifting calculation in this handbook starts with a free-body diagram.
Centre of gravity of a system of masses
The loading condition table of the stability booklet (Section 5.14) is exactly this computation.
Formulas
| Symbol | Description | Unit |
|---|---|---|
| Magnitude of the force | kN | |
| Angle from the positive x-axis, counter-clockwise | deg |
Result unit kN
| Symbol | Description | Unit |
|---|---|---|
| Position of the point of application relative to O | m | |
| Moment about O, counter-clockwise positive | kN·m |
Result unit kN·m
| Symbol | Description | Unit |
|---|---|---|
| Position vector from O to the point of application | m |
Result unit kN·m
Result unit -
Result unit -
Error of sin θ ≈ θ is 0.5 % at 10°, 1.1 % at 15°.
| Symbol | Description | Unit |
|---|---|---|
| Height of the point above the upright waterline | m | |
| Transverse offset towards the low side | m | |
| Heel angle | deg |
Result unit m
Measured from the point where the heeled waterline crosses the centreline (constant-displacement waterline shifts slightly for non-wall-sided hulls).
| Symbol | Description | Unit |
|---|---|---|
| Freeboard to the deck edge | m | |
| Breadth | m |
Result unit deg
| Symbol | Description | Unit |
|---|---|---|
| Mass of item i | t | |
| Coordinate of its centre of gravity | m |
Result unit m
Tables
Trigonometric values used in stability work
| Angle φ [°] | φ [rad] | sin φ | cos φ | tan φ | sin φ − φ (error of small-angle approx.) |
|---|---|---|---|---|---|
| 5 | 0.08727 | 0.08716 | 0.99619 | 0.08749 | −0.1 % |
| 10 | 0.17453 | 0.17365 | 0.98481 | 0.17633 | −0.5 % |
| 15 | 0.26180 | 0.25882 | 0.96593 | 0.26795 | −1.1 % |
| 20 | 0.34907 | 0.34202 | 0.93969 | 0.36397 | −2.0 % |
| 25 | 0.43633 | 0.42262 | 0.90631 | 0.46631 | −3.1 % |
| 30 | 0.52360 | 0.50000 | 0.86603 | 0.57735 | −4.5 % |
| 40 | 0.69813 | 0.64279 | 0.76604 | 0.83910 | −7.9 % |
| 50 | 0.87266 | 0.76604 | 0.64279 | 1.19175 | −12.2 % |
| 60 | 1.04720 | 0.86603 | 0.50000 | 1.73205 | −17.3 % |
Examples
Resultant of two mooring line forces and its moment about the ship's centre
Worked example
Problem
Two mooring lines act on a pontoon in the horizontal plane. Line 1: 80 kN at 30° from the x-axis (forward), applied at the point (20 m, 0). Line 2: 120 kN at 150°, applied at (−15 m, 0). Find the resultant force, its direction, and the yawing moment about the origin.
Deck-edge immersion angle of the example vessel
Worked example
Problem
Freeboard to the deck edge amidships 2.40 m, m. Find the angle of deck-edge immersion and compare with the IS Code weather-criterion limit on static heel.
References
Version 2 · last updated 20 Nov 2026 · Editor