References

71 standards cited in the handbook, grouped by instrument, with the clauses used and the sections citing them.

References are given at part/chapter level. Always verify against the edition in force.

IMO instruments

  • Gere & Timoshenko, Mechanics of Materials, 4th SI ed. (1999)

    Textbook

    Ch. 5 (Stresses in beams: flexure formula, shear stresses, composite beams) · Ch. 4 (Shear forces and bending moments) · Ch. 1 (Tension, compression and shear), Ch. 7.5 (Hooke's law for plane stress) · Ch. 12 (Review of centroids and moments of inertia) and Appendix D · Ch. 7 (Analysis of stress and strain: plane stress, principal stresses, Mohr's circle), Ch. 8 (Applications of plane stress — combined loadings) · Ch. 9 (Deflections of beams: integration, superposition, Macaulay), Ch. 10 (Statically indeterminate beams), Appendix G (Deflections and slopes of beams) · Ch. 3 (Torsion: circular shafts, power transmission, thin-walled tubes, non-circular sections) · Ch. 2 (Axially loaded members; thermal effects; statically indeterminate structures)

  • IMO Circ. TM.5/Circ.5 (Unified interpretations of the Tonnage Convention)

    Recommended

    whole document

    Cited in4.12
  • IMO International Code on Intact Stability, 2008 (Res. MSC.267(85)), as amended

    Mandatory

    Part A, Ch. 2.2 (General criteria), Ch. 2.3 (Weather criterion), Ch. 3; Part B Ch. 2.4 (OSV), 2.7 (anchor handling), 2.8 (towing), 2.9 (lifting), Ch. 6 (icing)

    Cited in5.6
  • IMO IS Code 2008

    MandatoryRecommended

    Part B, Ch. 3.3 (Effect of free surfaces of liquids in tanks) · Part B, Ch. 3.1 (Effect of superstructures, deckhouses and openings on the GZ curve) and Part B Ch. 3.5 (Cross curves) · Part A, Ch. 2.2.1–2.2.3 (Area criteria) · Part A, Ch. 2.3 (Severe wind and rolling criterion) incl. Tables 2.3.4-1 to 2.3.4-4 · Part B, Ch. 2.9 (Ships engaged in lifting operations), as amended by MSC.415(97) · Part B, Ch. 2.1 (Fishing vessels), Ch. 6.3.3 (Icing — fishing vessels) · Part B, Ch. 3.4 (Standard conditions of loading to be examined) and Ch. 3.6 (Stability booklet) · Part B, Annex 1 (Inclining test — plotting and evaluation of readings) · Part B, Ch. 3.6 (Stability booklet — hydrostatic data to be included) · Part B, Ch. 2.9 (Lifting operations — heel limits) and Ch. 3.1.2 (Passenger ships — crowding and turning heel limits) · Part A, Ch. 2.2.4 (GM0 ≥ 0.15 m) · Part B, Ch. 3.6 (Stability booklet — tank capacity tables with centroids and free surface moments) · Part B, Ch. 2.1.4 (Fishing vessels ≥ 45 m — weather criterion applies)

  • IMO IS Code 2008 (Res. MSC.267(85))

    Recommended

    Part B, Ch. 8 (Determination of lightship parameters) and Annex 1

    Cited in5.2
  • IMO MSC.1/Circ.1200 (2006) Interim guidelines for alternative assessment of the weather criterion

    Recommended

    whole document

    Cited in5.7
  • IMO Res. MSC.235(82) Guidelines for the design and construction of offshore supply vessels, 2006, as amended by MSC.335(90)

    Recommended

    Ch. 3 (Subdivision and damage stability)

    Cited in5.12
  • International Convention on Load Lines 1966/1988

    Mandatory

    Annex I, Reg. 10 (Information to be supplied to the master) · Annex I, Reg. 27 (Type A and type B-60/B-100 ships — damage assumptions)

    Cited in5.125.14
  • International Convention on Load Lines, 1966, as modified by the 1988 Protocol

    Mandatory

    Annex I, Reg. 3 (Definitions of terms)

    Cited in4.1
  • International Convention on Load Lines, 1966/1988

    Mandatory

    Annex I, Reg. 6 (Load lines — fresh water mark) and Reg. 40 · Annex I, Reg. 40 (Minimum freeboards — seawater density 1.025 t/m³)

    Cited in4.44.11
  • International Convention on Tonnage Measurement of Ships, 1969 (ITC 69), as amended

    Mandatory

    Annex I, Reg. 2 (Definitions), Reg. 3 (Gross tonnage), Reg. 4 (Net tonnage), Appendix 2 (coefficients)

    Cited in4.12
  • SOLAS 1974 as amended

    Mandatory

    Ch. II-1, Reg. 5 (Intact stability information) and Reg. 5-1 · Ch. II-1, Reg. 5-1 (Stability information to be supplied to the master)

    Cited in5.25.14
  • SOLAS 1974 as amended, Ch. II-1, Part B-1

    Mandatory

    Reg. 6–7-3 (Required and attained subdivision indices, permeability)

    Cited in5.12
  • SOLAS 1974, Ch. II-1

    Mandatory

    Reg. 5, 5-1 (Stability information) — makes IS Code Part A mandatory

    Cited in5.6
  • Timoshenko & Gere, Theory of Elastic Stability, 2nd ed. (1961)

    Textbook

    Ch. 2 (Columns), Ch. 9 (Buckling of thin plates)

    Cited in2.10
  • Timoshenko & Woinowsky-Krieger, Theory of Plates and Shells, 2nd ed. (1959)

    Textbook

    Ch. 5 (Simply supported rectangular plates), Ch. 6 (Rectangular plates with various edge conditions), Ch. 13 (Large deflections)

    Cited in2.9
  • Torremolinos Protocol 1993 / Cape Town Agreement 2012

    Mandatory

    Ch. III, Reg. 2 (Stability criteria), Reg. 3 (Flooding of fish holds), Reg. 7 (Operating conditions), Reg. 8 (Ice accretion)

    Cited in5.13

Flag state

  • Norwegian Maritime Authority — FOR-2000-02-15 nr 158 (fishing vessels ≥ 15 m) and FOR-2013-11-22 nr 1404 (fishing vessels < 15 m)

    Mandatory

    Stability chapters

    Cited in5.13

Classification societies

  • DNV Rules for Classification — Ships, Pt.2 Ch.2 (Metallic materials)

    Mandatory

    Sec. 2 (Rolled steel), Sec. 9 (Aluminium alloys)

    Cited in2.1
  • DNV Rules for Classification — Ships, Pt.3 Ch.1 (General principles)

    Mandatory

    Sec. 4 (Symbols and definitions)

    Cited in4.1
  • DNV Rules for Classification — Ships, Pt.3 Ch.1 Sec.4

    Mandatory

    Symbols and units used in rule formulas

    Cited in1.2
  • DNV Rules for Classification — Ships, Pt.3 Ch.15 (Stability)

    Mandatory

    Sec. 1–2 · Sec. 1 (Inclining test and lightweight survey)

    Cited in5.25.6
  • DNV Rules for Classification — Ships, Pt.3 Ch.15 (Stability) and Pt.6 (Loading computer systems)

    Mandatory

    Sec. 1 (Stability documentation) and loading computer approval requirements

    Cited in5.14
  • DNV Rules for Classification — Ships, Pt.3 Ch.3 (Structural design principles)

    Mandatory

    Sec. on effective flange of stiffeners and girders; net scantling approach

    Cited in2.5
  • DNV Rules for Classification — Ships, Pt.3 Ch.5 (Hull girder strength), Ch.6 (Hull local scantling), Ch.7 (Finite element analysis), Ch.8 (Buckling)

    Mandatory

    Permissible stress coefficients and acceptance criteria

    Cited in2.12
  • DNV Rules for Classification — Ships, Pt.3 Ch.6 (Hull local scantling)

    Mandatory

    Sec. 5 (Stiffeners — section modulus and shear area requirements) · Sec. 4 (Plating — thickness requirements for lateral pressure)

    Cited in2.42.9
  • DNV Rules for Classification — Ships, Pt.3 Ch.6 (pillars) and Ch.8 (Buckling)

    Mandatory

    Pillar requirements; buckling acceptance criteria

    Cited in2.10
  • DNV Rules for Classification — Ships, Pt.4 Ch.4 (Rotating machinery — power transmission)

    Mandatory

    Sec. 1 (Shafting — minimum diameter)

    Cited in2.7
  • DNV-CG-0127 Finite element analysis

    Recommended

    Sec. on yield check acceptance criteria (von Mises stress of shell elements) · Acceptance criteria for coarse and fine mesh

    Cited in2.82.12
  • DNV-CG-0129 Fatigue assessment of ship structures

    Recommended

    Sec. 2–4 (Fatigue loads, long-term distribution, S–N curves for ships)

    Cited in2.11
  • DNV-OS-C101 Design of offshore steel structures, general — LRFD method

    Mandatory

    Sec. 2 (Design principles — load and material factors)

    Cited in2.12
  • DNV-RP-C201 Buckling strength of plated structures

    Recommended

    Part 1 (Conventional buckling code — plates, stiffened panels, girders)

    Cited in2.10
  • DNV-RP-C202 Buckling strength of shells

    Recommended

    Sec. 3 (Unstiffened cylindrical shells)

    Cited in2.10
  • DNV-RP-C203 Fatigue design of offshore steel structures

    Recommended

    Sec. 2 (Fatigue analysis based on S–N data), Sec. 4 (Hot-spot stress by FE), Appendix A (Classification of structural details)

    Cited in2.11
  • DNV-ST-0378 Standard for offshore and platform lifting appliances

    Mandatory

    Sec. 4 (Design loads and load cases), Sec. 5–6 (Structural strength, allowable stresses, foundations) · Sec. 4 (Design loads — dynamic factors) · Sec. 4 (Design — bolted connections and foundations)

    Cited in2.22.125.10
  • IACS Recommendation No. 47 Shipbuilding and Repair Quality Standard

    Recommended

    Part A (New construction tolerances)

    Cited in1.9
  • IACS Unified Requirement S11 Longitudinal strength standard

    Mandatory

    S11.4 (Permissible stresses: 175/k bending, 110/k shear)

    Cited in2.12
  • IACS Unified Requirement W11 Normal and higher strength hull structural steels

    Mandatory

    Tables of mechanical properties

    Cited in2.1
  • IACS UR Z10.1–Z10.5 (Hull surveys) and DNV Rules Pt.7 Ch.1

    Mandatory

    Thickness measurement requirements and renewal criteria

    Cited in1.8

ISO and other standards

  • EN 1993-1-1:2005 Eurocode 3 — Part 1-1

    Recommended

    6.3.1 (Buckling resistance of members in compression — buckling curves) · 6.1 (Partial factors γ_M)

    Cited in2.102.12
  • EN 1993-1-8:2005 Eurocode 3 — Design of steel structures — Part 1-8: Design of joints

    Recommended

    Sec. 3 (Connections made with bolts), Sec. 4 (Welded connections)

    Cited in2.2
  • ISO 7462:1985 Shipbuilding — Principal ship dimensions — Terminology and definitions for computer applications

    Recommended

    whole document

    Cited in4.2
  • ISO 80000-1:2022 Quantities and units — Part 1: General

    Recommended

    Clause 7 (Printing rules for symbols and numbers), Annex B (Rounding of numbers) · whole document

    Cited in1.11.9
  • ISO 8666:2020 Small craft — Principal data

    Recommended

    whole document

    Cited in4.2
  • ISO 898-1:2013 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs

    Recommended

    Tables of property classes and stress areas

    Cited in2.2
  • ISO/IEC Guide 98-3:2008 (GUM) Uncertainty of measurement — Guide to the expression of uncertainty in measurement

    Recommended

    Ch. 5 (Determining combined standard uncertainty)

    Cited in1.8
  • Nordic Boat Standard 1990 (Nordisk Båtstandard for yrkesbåter under 15 m)

    Mandatory

    Section Y (Stability and buoyancy)

    Cited in5.13
  • UNECE Code of Uniform Standards and Procedures for the Performance of Draught Surveys of Coal Cargoes (1992)

    Recommended

    Sec. on draught corrections

    Cited in5.8

Textbooks and papers

  • Barrass & Derrett (2012)

    Textbook

    Ch. 22–24 (Trim, change of trim, loading to a required draught) · Ch. 21 (List) and Ch. 25 (Combined list and trim) · Ch. 27 (Dry-docking and grounding) · Ch. 11 (TPC), Ch. 22 (Trim — MCTC) · Ch. 13–16 (Transverse statical stability, effect of mass shifts, angle of loll) · Ch. 20 (Effect of free surface of liquids on stability) · Ch. 12 (Fresh water allowance and dock water allowance) · Ch. 26 (Heel due to suspended weights) · Ch. 17–19 (Curves of statical stability, KN cross curves) · Ch. 28–29 (Bilging and permeability)

  • Barrass & Derrett, Ship Stability for Masters and Mates, 7th ed. (2012)

    Textbook

    Ch. 2 (Density and specific gravity) and Ch. 3 (Laws of flotation) · Ch. 10 (Simpson's Rules) · Ch. 10 (Simpson's Rules for areas and centroids)

    Cited in1.34.44.5
  • BIPM, The International System of Units (SI), 9th edition (2019)

    Recommended

    Ch. 2 (SI units), Ch. 3 (prefixes), Ch. 4 (non-SI units accepted for use with the SI)

    Cited in1.1
  • Hibbeler, Engineering Mechanics: Statics, 14th ed. (2016)

    Textbook

    Ch. 2 (Force vectors), Ch. 4 (Force system resultants), Ch. 5 (Equilibrium of a rigid body)

    Cited in1.7
  • Hibbeler, Mechanics of Materials, 10th ed. (2017)

    Textbook

    Ch. 3 (Mechanical properties of materials), Ch. 10.6 (Material property relationships) · Ch. 9 (Stress transformation), Ch. 10.7 (Theories of failure) · Ch. 12 (Deflection of beams and shafts), Ch. 14 (Energy methods) · Appendix A (Geometric properties of an area)

    Cited in1.42.12.62.8
  • Holtrop & Mennen, International Shipbuilding Progress Vol. 29, No. 335 (1982)

    Textbook

    Eq. for S (wetted area)

    Cited in4.9
  • Hughes & Paik, Ship Structural Analysis and Design (SNAME, 2010)

    Textbook

    Ch. 9 (Stiffened panels — effective breadth, shear lag, section properties) · Ch. 9 (Stiffened panels — beam theory for stiffeners) · Ch. 12 (Elastic buckling of plates), Ch. 13 (Ultimate strength of plates), Ch. 14 (Stiffened panels) · Ch. 3 (Hull girder response — load, shear and moment curves) · Ch. 5 (Torsion of the hull girder — Bredt–Batho, warping) · Ch. 15 (Fatigue of ship structures) · Ch. 9 (Plate bending — small and large deflection, permanent set)

  • ITTC Recommended Procedures and Guidelines 7.5-02-01-03 (2011) Fresh Water and Seawater Properties

    Recommended

    Tables of density and viscosity vs temperature

    Cited in1.1
  • Maddox, S.J., Fatigue Strength of Welded Structures, 2nd ed. (1991)

    Textbook

    Ch. 2–4 (S–N approach, detail classification, variable amplitude)

    Cited in2.11
  • NIST SP 811 (2008)

    Recommended

    Ch. 7 and Appendix B.7 (Rounding)

    Cited in1.9
  • NIST Special Publication 811 (2008) Guide for the Use of the International System of Units

    Recommended

    Ch. 7 (Rules and style conventions), Appendix B (Conversion factors)

    Cited in1.2
  • Pilkey & Pilkey, Peterson's Stress Concentration Factors, 3rd ed. (2008)

    Textbook

    Ch. 4 (Holes), Ch. 5 (Miscellaneous design elements)

    Cited in2.8
  • PNA — Principles of Naval Architecture, Vol. I: Stability and Strength (SNAME, 1988)

    Textbook

    Ch. 1, Sec. 3 (Coefficients of form)

    Cited in4.3
  • PNA Vol. I (1988)

    Textbook

    Ch. 1, Sec. 7 (Bonjean curves) · Ch. 1, Sec. 6 (Hydrostatic curves)

    Cited in4.74.10
  • Press et al., Numerical Recipes, 3rd ed. (2007)

    Textbook

    Ch. 4 (Integration of functions — error terms of Newton–Cotes formulas)

    Cited in1.3
  • Press, Teukolsky, Vetterling & Flannery, Numerical Recipes, 3rd ed. (2007)

    Textbook

    Ch. 3 (Interpolation and extrapolation), Ch. 15 (Modeling of data — least squares)

    Cited in1.6
  • Rawson & Tupper (2001)

    Textbook

    Vol. 1, Ch. 3 (Bonjean curves) and Ch. 6 (Launching) · Vol. 1, Ch. 3 (Trim) · Vol. 1, Ch. 4 (Stability at large angles, cross curves) · Vol. 1, Ch. 4 (Dynamical stability) · Vol. 1, Ch. 3 (Wetted surface) · Vol. 1, Ch. 5 (Docking and grounding) · Vol. 1, Ch. 5 (Hazards and protection — flooding)

  • Rawson & Tupper, Basic Ship Theory, 5th ed. (2001)

    Textbook

    Vol. 1, Ch. 2 (Volumes and centroids of ship forms) and Ch. 3 (Tank calibration) · Vol. 1, Ch. 2 (Approximate integration: trapezoidal, Simpson, Tchebycheff, error analysis) · Vol. 1, Ch. 4 (Stability) · Vol. 1, Ch. 2 (Approximate integration) · Vol. 1, Ch. 3 (Flotation and trim — hydrostatic data) · Vol. 1, Ch. 3 and Ch. 4 (Stability — metacentre) · Vol. 1, Ch. 2 (Interpolation of ship curves; drawing of curves through spots) · Vol. 1, Ch. 4 (Stability — geometry of the heeled ship) · Vol. 1, Ch. 7 (Structural design and analysis — section modulus of stiffeners with plating) · Vol. 1, Ch. 2 (Some tools) · Vol. 1, Ch. 6 (The ship girder — weight, buoyancy, loading, shearing force and bending moment curves)

  • Roark's Formulas for Stress and Strain, 8th ed. (2012)

    Textbook

    Appendix A (Properties of sections) · Appendix A · Table 8.1 (Beams — shear, moment, slope and deflection formulas) · Table 11.4 (Flat rectangular plates)

    Cited in1.41.52.62.9
  • Schneekluth & Bertram (1998)

    Textbook

    Ch. 1.6 (Approximate formulae for KB, BM) · Ch. 1.6 and Appendix (empirical coefficients for waterplane inertia)

    Cited in4.64.7
  • Schneekluth & Bertram, Ship Design for Efficiency and Economy, 2nd ed. (1998)

    Textbook

    Ch. 1.5–1.6 (Block coefficient, midship section, waterplane)

    Cited in4.3
  • Taylor, J.R., An Introduction to Error Analysis, 2nd ed. (1997)

    Textbook

    Ch. 3 (Propagation of uncertainties), Ch. 8 (Least-squares fitting)

    Cited in1.8
  • Tupper, Introduction to Naval Architecture, 5th ed. (2013)

    Textbook

    Ch. 2 (Definition and regulation)

    Cited in4.2