Chapter 1 / Section 1.1
SI units and maritime units (tonne, knot, nautical mile, bar)
The SI system
The International System of Units (SI, BIPM 9th edition 2019) is the only system used in this handbook. Seven base units: metre (m), kilogram (kg), second (s), ampere (A), kelvin (K), mole (mol), candela (cd). Derived units used in naval architecture:
- Force: newton,
- Pressure and stress: pascal, ; in structural work
- Energy and work: joule,
- Power: watt,
- Moment: N·m (write "kN·m", never "kNm" or "mkN")
- Density: kg/m³ (in hydrostatics t/m³ is used so that volume in m³ gives mass in tonnes directly)
SI prefixes
See the table below. In naval architecture: mm for plate thicknesses and scantlings, m for ship dimensions, kN and MN for forces, kPa for sea pressures, MPa for stresses, GPa for elastic moduli (206 GPa = 206 000 MPa).
Non-SI units accepted for use with the SI
- tonne (metric ton), — the unit of mass displacement
- knot,
- nautical mile, (exact, international)
- bar, (pressure gauges, hydraulics)
- litre,
- degree of angle; radians must be used in all integrations (1° = π/180 rad)
- hour, minute
Maritime and legacy units still met in practice
- Long ton (UK, 2240 lb) — in older British stability texts and some US hydrostatic tables. Short ton (US) .
- Horsepower: metric hp (PS, CV) ; imperial/mechanical hp . Engine makers quote kW; older propulsion texts quote shp/bhp.
- tonne-force (tf) and kgf — in stability work "t·m" is a mass moment; multiply by to get kN·m.
- psi ; ksi — US material data.
- Fathom (6 ft) — older charts and anchoring tables.
- Metre of water head: of fresh water ; of seawater (1.025) ; so 1 bar ≈ 10.2 m FW ≈ 9.95 m SW.
- Gross tonnage is dimensionless (Section 4.12), not a mass.
Useful constants
See the table "Physical constants and standard values" below.
Formulas
Result unit m/s
| Symbol | Description | Unit |
|---|---|---|
| Weight (force) | kN when m in t | |
| Mass | t | |
| Standard gravity 9.80665 (use 9.81) | m/s² |
Result unit kN
1 t × 9.81 m/s² = 9.81 kN. Mass moments in t·m convert to kN·m by the same factor.
| Symbol | Description | Unit |
|---|---|---|
| Hydrostatic pressure | kPa when ρ in t/m³ | |
| Fluid density | t/m³ | |
| Head (depth below free surface) | m |
Result unit kPa
Seawater: p = 1.025 × 9.81 × h = 10.06 h kPa.
Tables
SI prefixes used in engineering
| Prefix | Symbol | Factor | Typical use |
|---|---|---|---|
| giga | G | 10^9 | GPa (elastic modulus), GN·m (hull girder moments on large ships) |
| mega | M | 10^6 | MPa (stress), MN, MN·m |
| kilo | k | 10^3 | kN, kPa (sea pressure), kW |
| — | — | 1 | m, N, Pa, W |
| centi | c | 10^-2 | cm (TPC, MCT1cm; section properties in cm³, cm⁴ in rule formulas) |
| milli | m | 10^-3 | mm (scantlings, deflections, FWA) |
| micro | μ | 10^-6 | μm (surface roughness), με (microstrain) |
Exact conversion factors for maritime and legacy units
| Quantity | Unit | Equals (SI) | Note |
|---|---|---|---|
| Length | 1 nautical mile (NM) | 1852 m | exact (1929 international) |
| Length | 1 foot | 0.3048 m | exact |
| Length | 1 inch | 25.4 mm | exact |
| Length | 1 fathom | 1.8288 m | 6 ft |
| Length | 1 cable (UK) | 185.2 m | 1/10 NM |
| Speed | 1 knot | 0.514444 m/s = 1.852 km/h | exact |
| Mass | 1 tonne (t) | 1000 kg | exact |
| Mass | 1 long ton (UK) | 1016.0469 kg | 2240 lb |
| Mass | 1 short ton (US) | 907.1847 kg | 2000 lb |
| Mass | 1 pound (lb) | 0.45359237 kg | exact |
| Force | 1 kgf | 9.80665 N | exact |
| Force | 1 tf (tonne-force) | 9.80665 kN | exact |
| Force | 1 lbf | 4.4482216 N | exact |
| Pressure | 1 bar | 100 kPa = 0.1 MPa | exact |
| Pressure | 1 atm | 101.325 kPa | exact |
| Pressure | 1 psi | 6.894757 kPa | exact |
| Pressure | 1 m head fresh water (ρ = 1.000) | 9.80665 kPa | — |
| Pressure | 1 m head seawater (ρ = 1.025) | 10.0518 kPa | — |
| Stress | 1 ksi | 6.894757 MPa | exact |
| Stress | 1 kgf/mm² | 9.80665 MPa | exact |
| Power | 1 hp (metric, PS, CV) | 735.49875 W | exact |
| Power | 1 hp (imperial / mechanical) | 745.69987 W | exact |
| Energy | 1 kWh | 3.6 MJ | exact |
| Volume | 1 litre | 0.001 m³ | exact |
| Volume | 1 US gallon | 3.785412 L | exact |
| Volume | 1 imperial gallon | 4.54609 L | exact |
| Volume | 1 barrel (oil) | 158.9873 L | 42 US gal |
| Angle | 1 degree | 0.01745329 rad | π/180 |
| Angle | 1 m·rad | 57.2958 m·deg | GZ-curve areas |
Physical constants and standard values used in this handbook
| Quantity | Symbol | Value | Source / note |
|---|---|---|---|
| Standard gravity | 9.80665 m/s² (use 9.81) | CGPM 1901 | |
| Seawater density (standard) | 1.025 t/m³ | ICLL 1966 Annex I Reg. 40 | |
| Fresh water density | 1.000 t/m³ | 4 °C; 0.998 at 20 °C | |
| Air density (15 °C, 1 atm) | 1.225 kg/m³ | ISA sea level; IS Code wind pressure 504 Pa | |
| Kinematic viscosity seawater 15 °C | 1.1883 × 10⁻⁶ m²/s | ITTC Recommended Procedure 7.5-02-01-03 | |
| Kinematic viscosity fresh water 15 °C | 1.1386 × 10⁻⁶ m²/s | ITTC 7.5-02-01-03 | |
| Atmospheric pressure | 101.325 kPa | standard | |
| Steel, Young's modulus | 206 000 MPa (DNV: 2.06 × 10⁵ N/mm²) | DNV Rules Pt.3 Ch.3; EC3 uses 210 000 | |
| Steel, shear modulus | 79 000 MPa (E/2(1+ν) = 79 230) | — | |
| Steel, Poisson's ratio | 0.30 | — | |
| Steel, density | 7.85 t/m³ (7850 kg/m³) | — | |
| Steel, thermal expansion | 12 × 10⁻⁶ /K | — | |
| Aluminium 5083, E | 70 000 MPa | DNV Rules Pt.2 Ch.2 | |
| Aluminium, density | 2.66–2.70 t/m³ | — | |
| Aluminium, thermal expansion | 23 × 10⁻⁶ /K | — | |
| Speed of sound in seawater | ≈ 1500 m/s | sonar / echo sounder |
Examples
Ship speed, Froude number and propulsive power in SI
Worked example
Problem
The example vessel ( m) has a service speed of 15.0 knots and a delivered power of 4000 kW. Express the speed in m/s and km/h, compute the Froude number, and convert the power to metric and imperial horsepower.
References
Free download from bipm.org.
Rules for writing symbols, units and numbers.
Version 2 · last updated 20 Nov 2026 · Editor