NavArchHandbook0 ch

No chapters yet.

Engineering toolsIndex of symbolsGlossaryReferences
NavArchHandbook
NavArchHandbook
↵
BookmarksTools
Home›2. Mechanics & Strength of Materials›2.7 Shear stress and torsion

Chapter 2 / Section 2.7

Shear stress and torsion

Print this section

Direct shear

Average shear stress τ=V/A\tau = V/Aτ=V/A on pins, bolts, rivets, lugs and welds (Section 2.2); beam shear by Jourawski's formula (Section 2.4). Pure shear produces principal stresses ±τ\pm\tau±τ at 45° (Section 2.8).

Torsion of circular shafts

For a solid or hollow circular section the shear stress varies linearly from the axis:

τ(r)=T rJ,τmax⁡=TWt=T roJ,J=π32(do4−di4)\tau(r) = \frac{T\,r}{J}, \qquad \tau_{\max} = \frac{T}{W_t} = \frac{T\,r_o}{J}, \qquad J = \frac{\pi}{32}\left(d_o^4 - d_i^4\right)τ(r)=JTr​,τmax​=Wt​T​=JTro​​,J=32π​(do4​−di4​)

Angle of twist θ=T LG J\theta = \dfrac{T\,L}{G\,J}θ=GJTL​. Power transmission: T=P/ω=P/(2πn)T = P/\omega = P/(2\pi n)T=P/ω=P/(2πn) with nnn in rev/s.

Propeller shafts: class rules give the minimum diameter as a function of power, speed and material (DNV Rules Pt.4 Ch.4 Sec.1); the simple torsion formula is the first check, to which bending (propeller weight, overhang), thrust and torsional vibration are added (Section 9.2).

Non-circular solid sections

No simple closed form; Saint-Venant torsion constant JtJ_tJt​ (not the polar moment) from tables. Rectangle b×hb \times hb×h (h≥bh \ge bh≥b): Jt≈β h b3J_t \approx \beta\,h\,b^3Jt​≈βhb3 and τmax⁡=T/(α h b2)\tau_{\max} = T/(\alpha\,h\,b^2)τmax​=T/(αhb2) at the middle of the long side; α,β\alpha, \betaα,β from the table (both → 1/3 for thin strips).

Thin-walled closed sections (Bredt–Batho)

For a single-cell tube of enclosed area AmA_mAm​ (to the wall mid-line) and wall thickness ttt:

τ=T2 Am t,Jt=4 Am2∮ds/t (=4Am2ts for constant t)\tau = \frac{T}{2\,A_m\,t}, \qquad J_t = \frac{4\,A_m^2}{\oint ds/t} \ (= \frac{4A_m^2 t}{s} \text{ for constant } t)τ=2Am​tT​,Jt​=∮ds/t4Am2​​ (=s4Am2​t​ for constant t)

Shear flow q=τt=T/(2Am)q = \tau t = T/(2A_m)q=τt=T/(2Am​) is constant around the cell. A ship's hull is a multi-cell closed box; the hull girder torsional moment (important for container ships with large hatch openings and for ro-ro ships) is treated in Section 7.2.

Thin-walled open sections

Open sections (I, channel, angle, flat bar) are very weak in torsion: Jt≈13∑biti3J_t \approx \tfrac{1}{3}\sum b_i t_i^3Jt​≈31​∑bi​ti3​, orders of magnitude less than a closed tube of the same material. Twisting also produces warping normal stresses (Vlasov theory); for crane booms, open-deck hull girders and long open-section members this is essential — Hughes & Paik Ch. 5.

Combined torsion and bending (shafts)

Equivalent moment for a circular shaft: Meq=M2+T2M_{eq} = \sqrt{M^2 + T^2}Meq​=M2+T2​ (Tresca) gives τmax⁡=16Meq/(πd3)\tau_{\max} = 16 M_{eq}/(\pi d^3)τmax​=16Meq​/(πd3); or compute σ\sigmaσ and τ\tauτ and apply von Mises (Section 2.8).

Formulas

01Torsional shear stress in a circular shaft
τmax⁡=T roJ=16 T doπ (do4−di4),J=π32(do4−di4)\tau_{\max} = \frac{T\,r_o}{J} = \frac{16\,T\,d_o}{\pi\,(d_o^4 - d_i^4)}, \qquad J = \frac{\pi}{32}\left(d_o^4 - d_i^4\right)τmax​=JTro​​=π(do4​−di4​)16Tdo​​,J=32π​(do4​−di4​)
SymbolDescriptionUnit
TTTTorqueN·mm
ro,dor_o, d_oro​,do​Outer radius / diametermm
did_idi​Inner diameter (0 for solid)mm
JJJPolar second moment of areamm⁴

Result unit MPa

Solid shaft: τ = 16 T / (π d³).

02Angle of twist
θ=T LG J\theta = \frac{T\,L}{G\,J}θ=GJTL​
SymbolDescriptionUnit
LLLLengthmm
GGGShear modulus (steel 79 000)MPa

Result unit rad

03Torque from power and speed
T=P2π nT = \frac{P}{2\pi\, n}T=2πnP​
SymbolDescriptionUnit
PPPPowerW
nnnRotational speedrev/s (rpm/60)

Result unit N·m

T [kN·m] = 9.549 P [kW] / n [rpm].

04Thin-walled closed section (Bredt–Batho)
τ=T2 Am t,Jt=4 Am2∮dst\tau = \frac{T}{2\,A_m\,t}, \qquad J_t = \frac{4\,A_m^2}{\oint \frac{ds}{t}}τ=2Am​tT​,Jt​=∮tds​4Am2​​
SymbolDescriptionUnit
AmA_mAm​Area enclosed by the wall mid-linemm²
tttWall thickness (may vary around the cell)mm

Result unit MPa

Thin circular tube: J_t = J = 2π r_m³ t.

05Thin-walled open section torsion constant
Jt≈13∑ibi ti3,τmax⁡≈T tmax⁡JtJ_t \approx \frac{1}{3}\sum_i b_i\, t_i^3, \qquad \tau_{\max} \approx \frac{T\, t_{\max}}{J_t}Jt​≈31​i∑​bi​ti3​,τmax​≈Jt​Ttmax​​
SymbolDescriptionUnit
bi,tib_i, t_ibi​,ti​Length and thickness of each flat elementmm

Result unit MPa

Warping stresses are not included; see Vlasov theory for long open members.

06Rectangular solid section
τmax⁡=Tα h b2,Jt=β h b3(h≥b)\tau_{\max} = \frac{T}{\alpha\, h\, b^2}, \qquad J_t = \beta\, h\, b^3 \quad (h \ge b)τmax​=αhb2T​,Jt​=βhb3(h≥b)
SymbolDescriptionUnit
α,β\alpha, \betaα,βCoefficients depending on h/b (table)-

Result unit MPa

07Equivalent moment for combined bending and torsion of a circular shaft (Tresca)
Meq=M2+T2,τmax⁡=16 Meqπ d3M_{eq} = \sqrt{M^2 + T^2}, \qquad \tau_{\max} = \frac{16\,M_{eq}}{\pi\, d^3}Meq​=M2+T2​,τmax​=πd316Meq​​
SymbolDescriptionUnit
MMMBending momentN·mm

Result unit MPa

Tables

Torsion coefficients for solid rectangular sections (h ≥ b)

h/bh/bh/bα\alphaαβ\betaβ
1.00.2080.141
1.20.2190.166
1.50.2310.196
2.00.2460.229
2.50.2580.249
3.00.2670.263
4.00.2820.281
5.00.2910.291
10.00.3120.312
∞0.3330.333
Source: Timoshenko & Goodier, Theory of Elasticity, 3rd ed. (1970), Table in Ch. 10; reproduced in Gere & Timoshenko (1999) and Roark Table 10.7.

Torsional stiffness comparison — same steel area (≈ 50 cm²)

SectionDimensionsJtJ_tJt​ [cm⁴]Relative to tube
Circular tubeØ 219.1 × 8 (A = 53 cm²)59201.00
Square box150 × 150 × 8 (A = 45 cm²)22900.39
Solid round barØ 80 (A = 50 cm²)4020.068
I-section (open)HE 200 B type, A ≈ 78 cm²≈ 600.010
Flat bar (open)250 × 20 (A = 50 cm²)≈ 650.011
Source: Computed from the formulas above (open sections by Σbt³/3); illustrates why open sections must not be used in torsion.

Examples

#01

Propeller shaft torsion

Worked example

Problem

The example vessel transmits 4000 kW at 150 rpm through a solid intermediate shaft of 300 mm diameter in forged steel. Find the torque, the maximum shear stress, and the twist over a 10 m length (G = 79 000 MPa).

Solution

n=150/60=2.5n = 150/60 = 2.5n=150/60=2.5 rev/s. T=4 000 0002π×2.5=254 650T = \dfrac{4\,000\,000}{2\pi \times 2.5} = 254\,650T=2π×2.54000000​=254650 N·m =254.6= 254.6=254.6 kN·m (check: 9.549×4000/150=254.69.549 \times 4000/150 = 254.69.549×4000/150=254.6).

J=π×3004/32=7.952×108J = \pi \times 300^4/32 = 7.952 \times 10^8J=π×3004/32=7.952×108 mm⁴.

τmax⁡=16×254.6×106π×3003=4.074×1098.482×107=48.0 MPa\tau_{\max} = \frac{16 \times 254.6 \times 10^6}{\pi \times 300^3} = \frac{4.074 \times 10^9}{8.482 \times 10^7} = 48.0\ \text{MPa}τmax​=π×300316×254.6×106​=8.482×1074.074×109​=48.0 MPa

Twist: θ=254.6×106×10 00079 000×7.952×108=0.0405\theta = \dfrac{254.6 \times 10^6 \times 10\,000}{79\,000 \times 7.952 \times 10^8} = 0.0405θ=79000×7.952×108254.6×106×10000​=0.0405 rad =2.3°= 2.3°=2.3° over 10 m.

The nominal stress is low, as is normal for class-rule shaft diameters (which also cover bending, stress concentrations at keyways and couplings, fatigue under reversing torque, and torsional vibration). Confirm the minimum diameter with DNV Rules Pt.4 Ch.4 for the actual material tensile strength.

#02

Shear stress in a crane pedestal from slewing torque

Worked example

Problem

A crane pedestal is a tube of 1200 mm outer diameter and 20 mm wall. The slewing torque is 150 kN·m. Find the torsional shear stress.

Solution

Mean radius rm=590r_m = 590rm​=590 mm; enclosed area Am=π×5902=1.094×106A_m = \pi \times 590^2 = 1.094 \times 10^6Am​=π×5902=1.094×106 mm².

τ=T2Amt=150×1062×1.094×106×20=3.4 MPa\tau = \frac{T}{2 A_m t} = \frac{150 \times 10^6}{2 \times 1.094 \times 10^6 \times 20} = 3.4\ \text{MPa}τ=2Am​tT​=2×1.094×106×20150×106​=3.4 MPa

Negligible compared with the bending stress from the overturning moment (Example 2.12), but it must be included in the von Mises combination at the critical fibre.

References

Gere & Timoshenko, Mechanics of Materials, 4th SI ed. (1999)Clause Ch. 3 (Torsion: circular shafts, power transmission, thin-walled tubes, non-circular sections)Textbook
Hughes & Paik, Ship Structural Analysis and Design (SNAME, 2010)Clause Ch. 5 (Torsion of the hull girder — Bredt–Batho, warping)Textbook
DNV Rules for Classification — Ships, Pt.4 Ch.4 (Rotating machinery — power transmission)Clause Sec. 1 (Shafting — minimum diameter)Mandatory

Confirm edition in force.

Previous · 2.6Deflection of beams (standard cases, superposition)Next · 2.8Combined stresses, principal stresses and von Mises criterion

Version 2 · last updated 19 Nov 2026 · Editor

On this page

  • Direct shear
  • Torsion of circular shafts
  • Non-circular solid sections
  • Thin-walled closed sections (Bredt–Batho)
  • Thin-walled open sections
  • Combined torsion and bending (shafts)
  • Formulas
  • Tables
  • Examples
  • References

Applicable standards

  • Gere & Timoshenko, Mechanics of Materials, 4th SI ed. (1999)

    Ch. 3 (Torsion: circular shafts, power transmission, thin-walled tubes, non-circular sections)

  • Hughes & Paik, Ship Structural Analysis and Design (SNAME, 2010)

    Ch. 5 (Torsion of the hull girder — Bredt–Batho, warping)

  • DNV Rules for Classification — Ships, Pt.4 Ch.4 (Rotating machinery — power transmission)

    Sec. 1 (Shafting — minimum diameter)

NavArch Handbook·About & disclaimerFeedbackBookmarks© Jadrija Maritime j.d.o.o.