NavArch Handbook
Chapter 2 / Section 2.7
Average shear stress on pins, bolts, rivets, lugs and welds (Section 2.2); beam shear by Jourawski's formula (Section 2.4). Pure shear produces principal stresses at 45° (Section 2.8).
For a solid or hollow circular section the shear stress varies linearly from the axis:
Angle of twist . Power transmission: with in rev/s.
Propeller shafts: class rules give the minimum diameter as a function of power, speed and material (DNV Rules Pt.4 Ch.4 Sec.1); the simple torsion formula is the first check, to which bending (propeller weight, overhang), thrust and torsional vibration are added (Section 9.2).
No simple closed form; Saint-Venant torsion constant (not the polar moment) from tables. Rectangle (): and at the middle of the long side; from the table (both → 1/3 for thin strips).
For a single-cell tube of enclosed area (to the wall mid-line) and wall thickness :
Shear flow is constant around the cell. A ship's hull is a multi-cell closed box; the hull girder torsional moment (important for container ships with large hatch openings and for ro-ro ships) is treated in Section 7.2.
Open sections (I, channel, angle, flat bar) are very weak in torsion: , orders of magnitude less than a closed tube of the same material. Twisting also produces warping normal stresses (Vlasov theory); for crane booms, open-deck hull girders and long open-section members this is essential — Hughes & Paik Ch. 5.
Equivalent moment for a circular shaft: (Tresca) gives ; or compute and and apply von Mises (Section 2.8).
| Symbol | Description | Unit |
|---|---|---|
| Torque | N·mm | |
| Outer radius / diameter | mm | |
| Inner diameter (0 for solid) | mm | |
| Polar second moment of area | mm⁴ |
Result unit MPa
Solid shaft: τ = 16 T / (π d³).
| Symbol | Description | Unit |
|---|---|---|
| Length | mm | |
| Shear modulus (steel 79 000) | MPa |
Result unit rad
| Symbol | Description | Unit |
|---|---|---|
| Power | W | |
| Rotational speed | rev/s (rpm/60) |
Result unit N·m
T [kN·m] = 9.549 P [kW] / n [rpm].
| Symbol | Description | Unit |
|---|---|---|
| Area enclosed by the wall mid-line | mm² | |
| Wall thickness (may vary around the cell) | mm |
Result unit MPa
Thin circular tube: J_t = J = 2π r_m³ t.
| Symbol | Description | Unit |
|---|---|---|
| Length and thickness of each flat element | mm |
Result unit MPa
Warping stresses are not included; see Vlasov theory for long open members.
| Symbol | Description | Unit |
|---|---|---|
| Coefficients depending on h/b (table) | - |
Result unit MPa
| Symbol | Description | Unit |
|---|---|---|
| Bending moment | N·mm |
Result unit MPa
| 1.0 | 0.208 | 0.141 |
| 1.2 | 0.219 | 0.166 |
| 1.5 | 0.231 | 0.196 |
| 2.0 | 0.246 | 0.229 |
| 2.5 | 0.258 | 0.249 |
| 3.0 | 0.267 | 0.263 |
| 4.0 | 0.282 | 0.281 |
| 5.0 | 0.291 | 0.291 |
| 10.0 | 0.312 | 0.312 |
| ∞ | 0.333 | 0.333 |
| Section | Dimensions | [cm⁴] | Relative to tube |
|---|---|---|---|
| Circular tube | Ø 219.1 × 8 (A = 53 cm²) | 5920 | 1.00 |
| Square box | 150 × 150 × 8 (A = 45 cm²) | 2290 | 0.39 |
| Solid round bar | Ø 80 (A = 50 cm²) | 402 | 0.068 |
| I-section (open) | HE 200 B type, A ≈ 78 cm² | ≈ 60 | 0.010 |
| Flat bar (open) | 250 × 20 (A = 50 cm²) | ≈ 65 | 0.011 |
Worked example
Problem
The example vessel transmits 4000 kW at 150 rpm through a solid intermediate shaft of 300 mm diameter in forged steel. Find the torque, the maximum shear stress, and the twist over a 10 m length (G = 79 000 MPa).
Solution
rev/s. N·m kN·m (check: ).
mm⁴.
Twist: rad over 10 m.
The nominal stress is low, as is normal for class-rule shaft diameters (which also cover bending, stress concentrations at keyways and couplings, fatigue under reversing torque, and torsional vibration). Confirm the minimum diameter with DNV Rules Pt.4 Ch.4 for the actual material tensile strength.
Worked example
Problem
A crane pedestal is a tube of 1200 mm outer diameter and 20 mm wall. The slewing torque is 150 kN·m. Find the torsional shear stress.
Solution
Mean radius mm; enclosed area mm².
Negligible compared with the bending stress from the overturning moment (Example 2.12), but it must be included in the von Mises combination at the critical fibre.
Confirm edition in force.