Chapter 1 / Section 1.5
Volumes and centroids of solids
Volume and centroid by integration of areas
For any solid whose cross-sectional area is known along an axis:
This is how the displacement and LCB (Section 4.4, 4.6) and tank volumes are computed from station areas or waterplane areas, with Simpson's rules doing the integration.
Standard solids
See the table. In ship work the most frequent are: the prism (tanks of constant section, parallel middle body), the wedge (immersed and emerged wedges in heel and trim; hopper tanks), the frustum of a pyramid/cone (tapered tanks, deck houses) and Pappus–Guldinus for revolved shapes (domes, masts, bulbous bows).
Pappus–Guldinus theorems
- A surface generated by revolving a plane curve of length about an external axis: with the distance of the curve's centroid from the axis.
- A volume generated by revolving a plane area : .
Centroids of composite solids
Used for the centre of gravity of lightship items (built from steel blocks and equipment), the centroid of tank contents (vertical centre of liquid, VCG of each tank at each filling), and the centre of buoyancy.
Tank calibration
A tank's volume and centroid are tabulated against sounding (or ullage) by integrating the horizontal sections of the tank at closely spaced heights; the free-surface second moment (Section 5.3) is tabulated at the same levels. For trim and heel, the calibration is repeated or corrected. Rectangular tanks with sloped (hopper) sides are trapezoidal prisms — see the example.
Shell and plate volumes (weight estimates)
Steel weight of a plated surface with the developed area and the thickness; add 5–10 % for stiffeners, brackets and welds in early estimates (Section 12.3 for small craft; Ch. 7 for ship structures).
Formulas
| Symbol | Description | Unit |
|---|---|---|
| Cross-sectional area at x | m² | |
| Volume | m³ | |
| Centroid position along x | m |
Result unit m³
| Symbol | Description | Unit |
|---|---|---|
| Volume of part i | m³ | |
| Centroid of part i | m |
Result unit m
| Symbol | Description | Unit |
|---|---|---|
| Distance of the centroid of the generating area from the axis | m | |
| Generating area | m² |
Result unit m³
| Symbol | Description | Unit |
|---|---|---|
| Length of the generating curve | m |
Result unit m²
| Symbol | Description | Unit |
|---|---|---|
| Width at the top | m | |
| Width at the bottom | m | |
| Height | m | |
| Length of the prism | m |
Result unit m³
| Symbol | Description | Unit |
|---|---|---|
| Developed plate area | m² | |
| Thickness | m |
Result unit t
Tables
Volumes and centroids of standard solids
| Solid | Volume | Centroid (from base) | Surface area |
|---|---|---|---|
| Prism / cylinder, base area A, height h | lateral: perimeter × h | ||
| Circular cylinder, diameter d, length ℓ | (lateral) | ||
| Pyramid / cone, base area A, height h | cone lateral: | ||
| Frustum of cone, radii R (base), r (top), height h | |||
| Frustum of pyramid, base areas A_1 (base), A_2 (top), height h | — | ||
| Sphere, radius r | (centre) | ||
| Hemisphere (flat face as base) | (curved) | ||
| Wedge: rectangular base b × ℓ, height h along ℓ (triangular section) | above base; from the thick end | — | |
| Ellipsoid, semi-axes a, b, c | centre | — | |
| Torus, tube radius r, centre radius R | centre |
Examples
Volume, mass and centroid of a hopper-sided fuel tank
Worked example
Problem
A double-bottom MGO tank has a trapezoidal cross-section: 8.0 m wide at the top, 6.0 m at the bottom, 1.50 m high, and is 12.0 m long. The tank bottom is 0.20 m above the keel. Find the full volume, the mass of MGO (0.85 t/m³) at 98 % filling, and the vertical centre of gravity of the liquid above the keel when full.
References
Version 2 · last updated 19 Nov 2026 · Editor