Chapter 1 / Section 1.3
Numerical integration: trapezoidal and Simpson's rules
Ship curves are given as tabulated ordinates; their areas, moments and volumes are found numerically. The full treatment of Simpson's rules with multipliers, half-stations and a worked waterplane example is in Section 4.5; this section gives the mathematical basis, the error behaviour, Tchebycheff's rule and the rules of choice.
Trapezoidal rule
Joins successive ordinates by straight lines:
Error of order : . Exact for straight lines; underestimates areas under convex (concave-down) curves such as GZ curves and waterlines — therefore conservative for stability areas.
Simpson's first rule
Fits a parabola through each three consecutive ordinates:
Error of order : . Exact for polynomials up to the third degree.
Simpson's second rule
Cubic through four ordinates; a multiple of 3:
Combining rules
For an awkward number of intervals, split the range: e.g. 7 intervals = 4 (first rule) + 3 (second rule). The 5–8–minus-1 rule gives the area between the first two of three ordinates (Section 4.5).
Tchebycheff's rule
Ordinates are placed at prescribed unequal positions so that all multipliers are equal to one; the area is simply the mean ordinate times the length:
with the ordinates at the positions (as a fraction of the half-length, measured from the midpoint) given in the table. Used for displacement and GZ-area checks where few ordinates are available, and historically in stability cross-curve work.
Which rule to use
| Situation | Rule |
|---|---|
| Waterplanes, sectional area curves, Bonjean areas | Simpson's first (10 or 20 intervals, half-stations at the ends) |
| GZ-curve areas for IS Code criteria (10° steps) | Simpson's second for 0–30°, first for 0–40° (Section 5.5) |
| GZ-curve areas at 5° or finer steps | Trapezoidal is acceptable (and conservative) |
| Rapid check with few ordinates | Tchebycheff |
| Strongly curved ends (bow, stern) | Half-stations or separate integration of the end portions |
Moments and centroids by the same table
Multiplying each product by the lever (and ) gives first and second moments — Section 4.6.
Formulas
| Symbol | Description | Unit |
|---|---|---|
| Area under the curve | (unit of y) × m | |
| Common interval | m | |
| Ordinate i | m (or as given) | |
| Number of intervals | - |
Result unit m²
| Symbol | Description | Unit |
|---|---|---|
| Length of the integration range | m | |
| Mean second derivative of the curve | 1/m |
Result unit m²
Negative error (underestimate) for concave-down curves.
Result unit m²
Full treatment and worked example: Section 4.5.
Result unit m²
Exact for cubic polynomials.
Result unit m²
| Symbol | Description | Unit |
|---|---|---|
| Total length of the range | m | |
| Number of ordinates | - | |
| Tchebycheff spacing coefficients (table) | - |
Result unit m²
Tables
Tchebycheff ordinate positions (fraction of the half-length from the midpoint)
| Number of ordinates n | Positions ± c_i |
|---|---|
| 2 | 0.5773 |
| 3 | 0, 0.7071 |
| 4 | 0.1876, 0.7947 |
| 5 | 0, 0.3745, 0.8325 |
| 6 | 0.2666, 0.4225, 0.8662 |
| 7 | 0, 0.3239, 0.5297, 0.8839 |
| 9 | 0, 0.1679, 0.5288, 0.6010, 0.9116 |
| 10 | 0.0838, 0.3127, 0.5000, 0.6873, 0.9162 |
No equal-weight (Tchebycheff) rule with real ordinate positions exists for n = 8; use 7 or 9 ordinates.
Comparison of integration rules on the test curve y = x(10 − x), 0 ≤ x ≤ 10 (exact area 166.667)
| Rule | Ordinates used | Result | Error |
|---|---|---|---|
| Trapezoidal, h = 5 | 0, 25, 0 | 125.0 | −25.0 % |
| Trapezoidal, h = 2.5 | 0, 18.75, 25, 18.75, 0 | 156.25 | −6.25 % |
| Trapezoidal, h = 1 | 11 ordinates | 165.0 | −1.0 % |
| Simpson first, h = 5 | 0, 25, 0 | 166.667 | 0 (exact: parabola) |
| Simpson second, h = 10/3 | 0, 22.22, 22.22, 0 | 166.667 | 0 |
| Tchebycheff, n = 2 | y at x = 5 ± 2.887: 16.667, 16.667 | 166.667 | 0 |
Examples
Displacement by Tchebycheff's 5-ordinate rule
Worked example
Problem
The sectional area curve of a 60 m barge-like hull is read at the five Tchebycheff positions. With the midpoint at m and half-length 30 m, the positions are and m, and m, and 30 m. Areas read [m²]: 12.4 (5.03 m), 36.8 (18.77 m), 40.8 (30 m), 35.9 (41.24 m), 9.6 (54.98 m). Find the displacement volume.
References
Version 2 · last updated 19 Nov 2026 · Editor