NavArch Handbook
Chapter 4 / Section 4.10
A Bonjean curve is the plot, for one station, of the immersed cross-sectional area against height above the baseline. Drawn for every station on the profile of the ship, the set of curves lets the engineer read the sectional area at any waterline — level, trimmed, or a wave profile — simply by intersecting the waterline with each curve.
For each station, the area up to each waterline is obtained by Simpson integration of the half-breadths over height (Section 4.6), doubled. Often the vertical moment of area about the baseline is drawn as a second curve on the same axes.
| Symbol | Description | Unit |
|---|---|---|
| Immersed area of the station up to height z | m^2 | |
| Half-breadth of the station at height ζ | m |
Result unit m^2
| Symbol | Description | Unit |
|---|---|---|
| Height of the waterline at station x (linear for trim; sinusoidal/trochoidal for a wave) | m |
Result unit m^3
Worked example
Problem
A 60 m vessel (stations every 6 m, 0 = AP to 10 = FP) floats at m and m. Bonjean areas read at the trimmed waterline are [m²]: 2.1, 14.8, 26.5, 34.9, 39.6, 40.8, 39.2, 33.5, 23.0, 10.4, 1.2. Find the displacement volume and LCB from midship.