NavArch Handbook
Chapter 4 / Section 4.3
Form coefficients are dimensionless ratios that describe the fullness of the hull. They are defined at a stated waterline — usually the design waterline — and must always be quoted with the length used ( or ).
Usually expressed as a percentage of forward (+) or aft (−) of midship. Full slow ships: 1–3 % forward; fast fine ships: 1–3 % aft of midship.
| Symbol | Description | Unit |
|---|---|---|
| Block coefficient | - | |
| Moulded displacement volume | m^3 | |
| Length (state L_{BP} or L_{WL}) | m | |
| Moulded breadth at waterline | m | |
| Draught | m |
Result unit -
| Symbol | Description | Unit |
|---|---|---|
| Midship section coefficient | - | |
| Immersed area of the midship section | m^2 |
Result unit -
| Symbol | Description | Unit |
|---|---|---|
| Longitudinal prismatic coefficient | - |
Result unit -
| Symbol | Description | Unit |
|---|---|---|
| Waterplane area coefficient | - | |
| Waterplane area | m^2 |
Result unit -
| Symbol | Description | Unit |
|---|---|---|
| Vertical prismatic coefficient | - |
Result unit -
| Symbol | Description | Unit |
|---|---|---|
| Bilge radius | m |
Result unit -
Valid for a rectangular section with circular bilge, no rise of floor, no deadrise.
| Ship type | Fn (typical) | ||||
|---|---|---|---|---|---|
| Crude oil tanker / bulk carrier | 0.80–0.86 | 0.81–0.87 | 0.98–0.995 | 0.87–0.92 | 0.14–0.17 |
| General cargo ship | 0.65–0.75 | 0.68–0.77 | 0.96–0.985 | 0.78–0.85 | 0.18–0.24 |
| Container ship (Panamax) | 0.58–0.68 | 0.60–0.70 | 0.97–0.985 | 0.75–0.82 | 0.22–0.28 |
| Offshore supply vessel / PSV | 0.68–0.78 | 0.72–0.80 | 0.93–0.98 | 0.82–0.90 | 0.20–0.30 |
| Stern trawler / fishing vessel | 0.50–0.62 | 0.58–0.68 | 0.80–0.92 | 0.75–0.85 | 0.28–0.38 |
| Tug | 0.50–0.60 | 0.60–0.70 | 0.80–0.90 | 0.78–0.86 | 0.30–0.40 |
| Frigate / fast displacement craft | 0.45–0.55 | 0.58–0.65 | 0.75–0.82 | 0.70–0.78 | 0.35–0.45 |
| Ro-ro / car ferry | 0.55–0.65 | 0.60–0.70 | 0.90–0.97 | 0.78–0.86 | 0.25–0.32 |
| Indicative | |
|---|---|
| 0.14 | 0.84 |
| 0.16 | 0.80 |
| 0.18 | 0.76 |
| 0.20 | 0.72 |
| 0.22 | 0.68 |
| 0.24 | 0.64 |
| 0.26 | 0.60 |
| 0.28 | 0.56 |
Worked example
Problem
A vessel has m, m, m, moulded displacement volume m³, immersed midship area m² and waterplane area m². Determine , , , and .
Source of the empirical relations between coefficients.