Working tools · client-side

Engineering tools

Conversions, first-pass calculations and reference data that follow the relations of the handbook. Every calculation runs in the browser; nothing is sent anywhere.

Water density values used in hydrostatics

WaterDensity ρ [t/m³]Specific volume [m³/t]Note
Standard seawater (ICLL)1.0250.9756Used for load line and class hydrostatics
Fresh water1.0001.000Rivers, lakes, FW tanks
Baltic Sea (brackish, typical)1.005–1.0120.988–0.995Varies with location and season
Dock water (typical estuary)1.010–1.0200.980–0.990Measure with hydrometer before draught survey
Dead Sea1.240.806Extreme example
Source: ICLL 1966/1988 Annex I Reg. 40 (seawater 1.025); typical regional values from hydrographic data. Always measure the actual dock water density.

Typical ranges of form coefficients by ship type (design waterline)

Ship typeC_BC_PC_MC_WPFn (typical)
Crude oil tanker / bulk carrier0.80–0.860.81–0.870.98–0.9950.87–0.920.14–0.17
General cargo ship0.65–0.750.68–0.770.96–0.9850.78–0.850.18–0.24
Container ship (Panamax)0.58–0.680.60–0.700.97–0.9850.75–0.820.22–0.28
Offshore supply vessel / PSV0.68–0.780.72–0.800.93–0.980.82–0.900.20–0.30
Stern trawler / fishing vessel0.50–0.620.58–0.680.80–0.920.75–0.850.28–0.38
Tug0.50–0.600.60–0.700.80–0.900.78–0.860.30–0.40
Frigate / fast displacement craft0.45–0.550.58–0.650.75–0.820.70–0.780.35–0.45
Ro-ro / car ferry0.55–0.650.60–0.700.90–0.970.78–0.860.25–0.32
Source: Compiled from Schneekluth & Bertram (1998) Ch. 1 and Watson (1998) Ch. 3; PNA Vol. I (1988) Ch. 1. Ranges are indicative for first estimates.

IMO 2008 IS Code — general intact stability criteria (Part A, Ch. 2.2)

No.CriterionLimitIS Code reference
1Area under GZ curve, 0° to 30°≥ 0.055 m·radPart A 2.2.1
2Area under GZ curve, 0° to 40° or φf≥ 0.090 m·radPart A 2.2.1
3Area under GZ curve, 30° to 40° or φf≥ 0.030 m·radPart A 2.2.1
4Righting lever GZ at heel ≥ 30°≥ 0.20 mPart A 2.2.2
5Angle of maximum GZ≥ 25° (preferably > 30°)Part A 2.2.3
6Initial GM0, free-surface corrected≥ 0.15 mPart A 2.2.4
7Severe wind and rolling (weather criterion)Area b ≥ area a; steady heel ≤ 16° or 80 % deck-edge immersionPart A 2.3
Source: IMO International Code on Intact Stability, 2008 (Res. MSC.267(85)) as amended, Part A, Chapter 2. Mandatory under SOLAS II-1/5 and ICLL 1988 Protocol.

Permeability values (SOLAS Ch. II-1, Reg. 7-3)

SpacePermeability μ
Appropriated to stores0.60
Occupied by accommodation0.95
Occupied by machinery0.85
Void spaces0.95
Intended for liquids0 or 0.95, whichever gives the more severe requirement
Dry cargo spaces (at ds / dp / dl)0.70 / 0.80 / 0.95
Container spaces (at ds / dp / dl)0.70 / 0.80 / 0.95
Ro-ro spaces (at ds / dp / dl)0.90 / 0.90 / 0.95
Cargo liquids (at ds / dp / dl)0.70 / 0.80 / 0.95
Source: SOLAS 1974 as amended, Ch. II-1, Part B-1, Reg. 7-3 (Permeability).

Steel grades — yield, tensile and material factor

GradeYield ReH [MPa]Tensile Rm [MPa]Material factor k
A / B / D / E235400–5201.00
AH32 / DH32 / EH32315440–5700.78
AH36 / DH36 / EH36355490–6300.72
AH40 / DH40 / EH40390510–6600.68
Source: IACS UR W11 (Normal and higher strength hull structural steels); material factor k per DNV Rules Pt.3 Ch.3 Sec.1 — verify with the edition in force.

Densities of common materials

MaterialDensity [t/m³]
Steel7.85
Aluminium 50832.66
GRP (E-glass/polyester, ~35 % fibre by volume)1.6–1.9
PVC foam core0.06–0.25
Plywood0.55–0.70
Teak0.65
Lead11.34
Concrete2.3–2.4
Seawater1.025
Marine gas oil (MGO)0.85
Heavy fuel oil (HFO)0.97
Source: Typical handbook values.