Chapter 09
Machinery, Piping & Electrical
Interfaces between hull engineering and machinery: engine room arrangement, shafting and alignment basics, piping systems and pipe sizing, pumps and head calculations, ventilation, electrical load balance and cabling fundamentals, with emphasis on what a structural naval architect must know for foundations, penetrations and layout.
This chapter currently has 0 of 10 sections with content. The remaining sections list the planned scope.
Sections
- 9.1Engine room arrangement and machinery foundationsContent for this section is in preparation. See the chapter overview for scope.
- 9.2Shafting, bearings and alignment fundamentalsContent for this section is in preparation. See the chapter overview for scope.
- 9.3Piping systems overview: bilge, ballast, fuel, cooling, fire mainContent for this section is in preparation. See the chapter overview for scope.
- 9.4Pipe sizing, flow velocity and pressure dropContent for this section is in preparation. See the chapter overview for scope.
- 9.5Pumps: head, NPSH, capacity rules (class and SOLAS)Content for this section is in preparation. See the chapter overview for scope.
- 9.6Penetrations through watertight and fire-rated boundariesContent for this section is in preparation. See the chapter overview for scope.
- 9.7Ventilation and air flow requirementsContent for this section is in preparation. See the chapter overview for scope.
- 9.8Electrical load balance and generator sizingContent for this section is in preparation. See the chapter overview for scope.
- 9.9Cable sizing, routing and penetrationsContent for this section is in preparation. See the chapter overview for scope.
- 9.10Vibration and noise basics for machinery installationsContent for this section is in preparation. See the chapter overview for scope.