Chapter 08
Welding & Fabrication
Welding processes used in shipbuilding, joint types and weld symbols, weld sizing and strength, welding of steel and aluminium, weld quality and NDT, fabrication tolerances and distortion control, and class requirements for welding procedures and welder qualification.
This chapter currently has 0 of 10 sections with content. The remaining sections list the planned scope.
Sections
- 8.1Welding processes in shipbuilding (SMAW, GMAW, FCAW, SAW)Content for this section is in preparation. See the chapter overview for scope.
- 8.2Joint types, weld symbols (ISO 2553) and edge preparationContent for this section is in preparation. See the chapter overview for scope.
- 8.3Fillet weld sizing and throat thickness rules (class rules)Content for this section is in preparation. See the chapter overview for scope.
- 8.4Weld strength calculationContent for this section is in preparation. See the chapter overview for scope.
- 8.5Welding of aluminium: alloys, HAZ, filler selectionContent for this section is in preparation. See the chapter overview for scope.
- 8.6Welding procedure specification (WPS/PQR) and welder qualification (ISO 9606)Content for this section is in preparation. See the chapter overview for scope.
- 8.7Weld defects, NDT methods and acceptance levelsContent for this section is in preparation. See the chapter overview for scope.
- 8.8Distortion, residual stress and straighteningContent for this section is in preparation. See the chapter overview for scope.
- 8.9Fabrication tolerances (IACS Rec. 47)Content for this section is in preparation. See the chapter overview for scope.
- 8.10Steel preparation, cutting and surface treatmentContent for this section is in preparation. See the chapter overview for scope.