NavArchHandbook0 ch

No chapters yet.

Engineering toolsIndex of symbolsGlossaryReferences
NavArchHandbook
NavArchHandbook
↵
BookmarksTools
Home›11. Mooring & Anchoring›11.3 Anchors: types, holding power and seabed conditions

Chapter 11 / Section 11.3

Anchors: types, holding power and seabed conditions

Print this section

In preparation

Content for this section is in preparation. See the chapter overview for scope.

Planned scope

Design of mooring and anchoring systems for ships, pontoons and marina structures: environmental loads from wind, current and waves, mooring line and fender loads, anchor holding power, chain and rope selection, equipment number for ship anchoring equipment, and the British Standards (BS 6349 series) and PIANC guidance for maritime structures.

Previous · 11.2Equipment Number and anchoring equipment per class rulesNext · 11.4Chain, wire and synthetic rope: properties and breaking loads

Version 1 · last updated 19 Nov 2026 · Editor

On this page

    Applicable standards

      NavArch Handbook·About & disclaimerFeedbackBookmarks© Jadrija Maritime j.d.o.o.