NavArchHandbook0 ch

No chapters yet.

Engineering toolsIndex of symbolsGlossaryReferences
NavArchHandbook
NavArchHandbook
↵
BookmarksTools
Home›11. Mooring & Anchoring›11.4 Chain, wire and synthetic rope: properties and breaking loads

Chapter 11 / Section 11.4

Chain, wire and synthetic rope: properties and breaking loads

Print this section

In preparation

Content for this section is in preparation. See the chapter overview for scope.

Planned scope

Design of mooring and anchoring systems for ships, pontoons and marina structures: environmental loads from wind, current and waves, mooring line and fender loads, anchor holding power, chain and rope selection, equipment number for ship anchoring equipment, and the British Standards (BS 6349 series) and PIANC guidance for maritime structures.

Previous · 11.3Anchors: types, holding power and seabed conditionsNext · 11.5Catenary mooring analysis for pontoons and floating structures

Version 1 · last updated 19 Nov 2026 · Editor

On this page

    Applicable standards

      NavArch Handbook·About & disclaimerFeedbackBookmarks© Jadrija Maritime j.d.o.o.