NavArchHandbook0 ch

No chapters yet.

Engineering toolsIndex of symbolsGlossaryReferences
NavArchHandbook
NavArchHandbook
↵
BookmarksTools
Home›11. Mooring & Anchoring›11.5 Catenary mooring analysis for pontoons and floating structures

Chapter 11 / Section 11.5

Catenary mooring analysis for pontoons and floating structures

Print this section

In preparation

Content for this section is in preparation. See the chapter overview for scope.

Planned scope

Design of mooring and anchoring systems for ships, pontoons and marina structures: environmental loads from wind, current and waves, mooring line and fender loads, anchor holding power, chain and rope selection, equipment number for ship anchoring equipment, and the British Standards (BS 6349 series) and PIANC guidance for maritime structures.

Previous · 11.4Chain, wire and synthetic rope: properties and breaking loadsNext · 11.6Mooring arrangement, line loads and fender reactions (BS 6349-4, OCIMF MEG4)

Version 1 · last updated 19 Nov 2026 · Editor

On this page

    Applicable standards

      NavArch Handbook·About & disclaimerFeedbackBookmarks© Jadrija Maritime j.d.o.o.