Chapter 11
Mooring & Anchoring
Design of mooring and anchoring systems for ships, pontoons and marina structures: environmental loads from wind, current and waves, mooring line and fender loads, anchor holding power, chain and rope selection, equipment number for ship anchoring equipment, and the British Standards (BS 6349 series) and PIANC guidance for maritime structures.
This chapter currently has 0 of 9 sections with content. The remaining sections list the planned scope.
Sections
- 11.1Environmental loads: wind, current and wave forces on moored vesselsContent for this section is in preparation. See the chapter overview for scope.
- 11.2Equipment Number and anchoring equipment per class rulesContent for this section is in preparation. See the chapter overview for scope.
- 11.3Anchors: types, holding power and seabed conditionsContent for this section is in preparation. See the chapter overview for scope.
- 11.4Chain, wire and synthetic rope: properties and breaking loadsContent for this section is in preparation. See the chapter overview for scope.
- 11.5Catenary mooring analysis for pontoons and floating structuresContent for this section is in preparation. See the chapter overview for scope.
- 11.6Mooring arrangement, line loads and fender reactions (BS 6349-4, OCIMF MEG4)Content for this section is in preparation. See the chapter overview for scope.
- 11.7Marina pontoons and piles: design loads (BS 6349-6, PIANC)Content for this section is in preparation. See the chapter overview for scope.
- 11.8Bollards, cleats and deck fittings: load ratings and foundationsContent for this section is in preparation. See the chapter overview for scope.
- 11.9Safe working load, design factors and inspectionContent for this section is in preparation. See the chapter overview for scope.